Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 02-23-2007, 05:57 PM
mmlm mmlm is offline
LawnSite Member
 
Join Date: Oct 2006
Location: columbus, georgia
Posts: 7
Walker Hydro motors

My 1994 Walker is not pulling correctly, I've checked all the belts, they seem fine. Does anyone know where to buy after market Hydro motors in case I need a Motor. Also, the wide 3 groove belt I think is the PTO belt, isn't that for the blades? Any help would be greatly appreciated. Thanks, Mike
Reply With Quote
  #2  
Old 02-23-2007, 07:55 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,679
You can check here for parts;

http://j-thomas.com/main_pages/OLcatalog_06.html

Not sure about the belt....
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...

"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #3  
Old 02-23-2007, 08:04 PM
lucforce lucforce is offline
LawnSite Member
 
Join Date: Mar 2006
Location: Mobile AL
Posts: 225
Assuming you have a GHS, the three-"V" belt runs the blower and the deck or other front attachment via a gearbox.

What does "not pulling correctly" mean?
Reply With Quote
  #4  
Old 02-23-2007, 08:38 PM
mmlm mmlm is offline
LawnSite Member
 
Join Date: Oct 2006
Location: columbus, georgia
Posts: 7
Not pulling correctly, I mean its like the steering levers when pushed forward it doesn't want to go or it will turn to the left good but not to the right, like maybe the right hydro is bad or I'm really not sure.

thanks
Reply With Quote
  #5  
Old 02-23-2007, 08:48 PM
khouse khouse is offline
LawnSite Bronze Member
 
Join Date: Feb 2001
Location: lee's summit, mo
Posts: 1,479
Make sure all you steering connectors are tight all the way to the hydro.
Reply With Quote
  #6  
Old 02-23-2007, 08:59 PM
mmlm mmlm is offline
LawnSite Member
 
Join Date: Oct 2006
Location: columbus, georgia
Posts: 7
Are the steering connectors like screws and bolts or what am I looking for.
Thanks
Reply With Quote
  #7  
Old 02-23-2007, 09:30 PM
ed2hess's Avatar
ed2hess ed2hess is online now
LawnSite Fanatic
 
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 11,553
Make sure that all those springs in the steering linkage are very well lubed because they can stick. If they are sticking your unit fails to go forward after going backwards. Usually if hydro is going it will fail when it is hot and under load like going up ramp. Be sure all the belts are good to the hydro and idlers greased and working. The hydro is costly no way around it!
Reply With Quote
  #8  
Old 02-24-2007, 04:12 PM
AAELI AAELI is offline
LawnSite Senior Member
 
Join Date: May 2006
Location: Barrigada, Guam
Posts: 363
Hydro oil change?

In addition to all the above you might want to check / change your hydro oil.
Reply With Quote
  #9  
Old 02-24-2007, 08:23 PM
mmlm mmlm is offline
LawnSite Member
 
Join Date: Oct 2006
Location: columbus, georgia
Posts: 7
Does anyone know where I can find a how to web site to change my hydro and how do I tell which is my left and which is my right, because when I pull back on my right handle my mower does not turn to mthe right? I've checked fluid and it seems fine. It might be my right hydro, I thnk.
thanks, mike
Reply With Quote
  #10  
Old 02-24-2007, 08:50 PM
gene gls's Avatar
gene gls gene gls is offline
LawnSite Gold Member
 
Join Date: Dec 1999
Location: Granville, Ma. 01034
Posts: 3,060
Quote:
Originally Posted by mmlm View Post
Does anyone know where I can find a how to web site to change my hydro and how do I tell which is my left and which is my right, because when I pull back on my right handle my mower does not turn to mthe right? I've checked fluid and it seems fine. It might be my right hydro, I thnk.
thanks, mike
I think it would be cheaper for you to have a Walker dealer do an evaluation on your unit before you start replacing parts. A Walker hydro is around $550.00. My dealer charges 1 hour labor to check out a machine.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 07:52 PM.

Page generated in 0.09743 seconds with 7 queries