Cub cadet z wing

[GreenN'Clean]

Have you contacted cubcadetcommerical

[Mowingman]

We just took on the Cub line, but I have not looked really close at the deck details on the RZT and ZForce machines we got in. At first glance, they do appear to use the same decks.
You do realize, I hope, the neither the RZT, nor the ZForce are true commercial quality units. We have inherited a couple of customers who were sold ZForce machines with the understanding they could withstand heavy commercial use. This is not true. The ZForce will be ok if you are just doing a few lawns/week. If you plan on using the ZForce as a frontline commercial mower day in day out, forget it. You will not be a happy camper in a few months.

[stuffdeer]

I knew that when I bought it.

Its rated for 500 hours, and at the rate I'm going, It'll last me 5 years.

Thanks for the deck info though...that is good to know.

[vaughnslawns]

Have had my whole deck replaced 2 time"s lotttttttttttssss of issues. all taken care under warrenty new arms, spindels, cabels,starter,switch,uummmm....seat bolts,2 sets of tires, {not covered}and i am sure lots i forgot..... other than that.... great mower

[NMS0219]

Peter I'll get some pictures and post them. Its close to what you have in the photo its just not exact. Another dumb question is that the deck folds so will the catcher bracket cause any problems with that. I also tried to get one from cub cadet they dont make one at this time.

[PeterA]

Nick,
The bracket sticks up about 1 3/8 inches above the edge of the deck (right at the edge). When you fold the deck up does the edge you are folding up actually touch another part of the mower? If not, the bracket will probably not be in the way. If it does, the deck would not be able to fold all the way up because the bracket would obstruct it by 1 3/8 inches.

[NMS0219]

It comes close so I'll have to measure it. I'll do that in the am

[Nathan Cameron]

Hi there i have the zwing would call it tuff as... but i have broken the spindle @ 200hours i need a part number for the spindle s/n on the machine is 53ai5bby630 ..... dom 04 / 2006

[vaughnslawns]

wanna whole unit?

[Nathan Cameron]

Originally Posted by vaughnslawns

wanna whole unit?

$?
you have one