Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 02-27-2007, 07:26 PM
rfed32 rfed32 is offline
LawnSite Senior Member
 
Join Date: Dec 2005
Location: Hatboro
Posts: 680
break controler

i would like to put a break controler in my truck i was wonderin what i would need to do this???help
__________________
Chevy trucks
meyers plow
gravely walk behinds
echo trimmers
red max back pack blower
sthil chain saws

My Page:
[url]http://www.lawnsite.com/showthread.php?t=258151[/]

...love what you do, do what you love, life is good...
Reply With Quote
  #2  
Old 02-27-2007, 07:36 PM
corey4671 corey4671 is offline
LawnSite Silver Member
 
Join Date: Sep 2006
Location: Somewhere in TN
Posts: 2,943
is it the "new" body style 99 or the "old" body style 99?
Reply With Quote
  #3  
Old 02-27-2007, 08:29 PM
rfed32 rfed32 is offline
LawnSite Senior Member
 
Join Date: Dec 2005
Location: Hatboro
Posts: 680
old body...why does that make a diff?
__________________
Chevy trucks
meyers plow
gravely walk behinds
echo trimmers
red max back pack blower
sthil chain saws

My Page:
[url]http://www.lawnsite.com/showthread.php?t=258151[/]

...love what you do, do what you love, life is good...
Reply With Quote
  #4  
Old 02-27-2007, 09:59 PM
corey4671 corey4671 is offline
LawnSite Silver Member
 
Join Date: Sep 2006
Location: Somewhere in TN
Posts: 2,943
the new body styles came from the factory with a pigtail that just plugs right in to the wiring harness for a brake controler.
Reply With Quote
  #5  
Old 02-28-2007, 03:45 AM
C&K's Avatar
C&K C&K is offline
LawnSite Senior Member
 
Join Date: Jan 2007
Location: East TN
Posts: 295
Quote:
Originally Posted by rfed32 View Post
i would like to put a break controler in my truck i was wonderin what i would need to do this???help
I installed one onto my 2000 model 2500 a few days ago.(old body style)
You will have to hook into constant power(from battery is recommended) with a fuse. You will hook into the brake switch wire(located up the pedal shaft you will find a switch) that turns to +12v when the brake is pressed. and a ground. All of this goes to your brake assist box in the cab. Then you run a single wire from the brake box to the back of the truck and it hooks into your brake wire on your trailer.(through a wire in your harness that the trailer plugs into)

Seems hard but is easy to do, but it does take some time.
Look for this too.
I followed my factory wiring in the back from where the plug(flat 4 pin) that you T-off of to plug the trailer wiring harness into the factory wiring to the frame and pulled the tape and loom off and found two factory installed unused wires that run up to the front. They come up at the firewall under the brake booster. then drill a small hole into the cab through the firewall and install a grommet to keep the metal from cutting into the wire over time. If you can locate this wire it will save you from running a new one and securing it under the length of the truck. One wire was a small white wire and the other was a larger orange wire on my truck and it turned back to the front inside the tape and loom. just keep removing the loom untill you can pull the end out and connect it to your trailer wiring. Use the larger wire as its the same size as the output wire on the brake assist box.
oh yea, the white wire can be used in place of finding the brake wire at the pedal switch...just check it to verify that it turns to 12V when you press the brake. The brake switch is up there pretty good and hard to get to. I found the brake wire to the left of the brake pedal in with some other wires...it was White.So I didn't use the one under the truck.

GM uses same wire colors on most all makes and models

I hope this helps you some.
Reply With Quote
  #6  
Old 02-28-2007, 05:14 AM
vntgrcr's Avatar
vntgrcr vntgrcr is offline
LawnSite Senior Member
 
Join Date: Feb 2005
Location: southeast massachussetts
Posts: 282
And to start with it is "brake"! Unless you are trying to control "breaking" something else.
__________________
David Svarczkopf
Schooner Excavation/ Landscape Const.
Cape Cod, MA
1989 F800
2007 NPR Dump
2006 Kubota 161
2007 T190
toys in avatar
Dodge Ram 3500
Reply With Quote
  #7  
Old 02-28-2007, 10:57 PM
rfed32 rfed32 is offline
LawnSite Senior Member
 
Join Date: Dec 2005
Location: Hatboro
Posts: 680
hey vntgrcr thats i dont realize what i type when i type it i just type lol...

c&k thanks 4 the help i hope to instal this weekend
__________________
Chevy trucks
meyers plow
gravely walk behinds
echo trimmers
red max back pack blower
sthil chain saws

My Page:
[url]http://www.lawnsite.com/showthread.php?t=258151[/]

...love what you do, do what you love, life is good...
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 12:33 PM.

Page generated in 0.08336 seconds with 7 queries