Catcher for Gravely 148 XDZ

[Nitro2007]

Hi,

Just wondering if you have a catcher for Gravely's XDZ series of ZTR's?

I have a 2007 148 XDZ and my understanding is that the XDZ deck is different than that deck for the Gravely 148M or 148z.

Thanks.

[PeterA]

Check our gravely page:
http://www.acceleratorindustries.com...ls/gravely.htm
I think your deck may have the same opening as the 60 inch (shown at the bottom of the page). The GCGR60Z or GCGR60ZXL will fit this. We try to show the various openings of the mowers in our mower models section of the website. Manufacturers are always changing things on their mowers, so a visual check to compare your mower is really helpful in avoiding catcher model mixups. You can always call us directly for consultation on fit issues.

[Nitro2007]

Thanks Peter.

I took a look at the page you bookmarked. I will email a photo of my deck as it is different than the 260 deck on your website. The Gravely dealer indicated that my mower has their new "X factor deck." My deck doesn't have that welded piece that runs the length of the deck opening (the one that is set back 1 3/16" and is 2" high in the photo of the Gravely 44 inch deck on the website) My welded piece is only about 4 or 5 inches long.

[PeterA]

That would be great. You don't need the set back lip on the GCGR60Z series catcher. It comes with a bracket you bolt down to the deck.