Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 08-23-2001, 09:39 PM
Mike Paulsen Mike Paulsen is offline
LawnSite Member
 
Join Date: Nov 2000
Location: Idaho
Posts: 99
Remote

For blowing out systems is there a remote you can put on any type controller box that you can change to the next valve when away from the box? It would save a lot of leg work.
__________________
Mike Paulsen
Reply With Quote
  #2  
Old 08-24-2001, 01:35 AM
gusbuster's Avatar
gusbuster gusbuster is online now
LawnSite Bronze Member
 
Join Date: Mar 2000
Location: Sunny Northern California, San Francisco Bay Area
Posts: 1,532
Yes,BUT expensive. I wouldn't go this route unless you're doing this all the time.

Said your from Idaho, if around the Boise area, check out "Horizon or United Green Mark". I can't remember which company is up that way, but either one could help you out with something that you're asking.

John
__________________
J-LC Landscaping & Maintenance Gardening
C-27 CA. Contr# 770044
Reply With Quote
  #3  
Old 08-24-2001, 07:46 AM
HBFOXJr HBFOXJr is offline
LawnSite Bronze Member
 
Join Date: Jul 2001
Location: Southern New Jersey
Posts: 1,700
REmote Control Technologies, Redmond, Washington.

Kit comes with transmitter & reciever, 1 permanent mount port and one port with alligator clips you can move from clock to clock.

About $850.00???

That's why I use Hunter clocks and their remotes.

RainBird RC controllers are bad because they have no terminal strip to clip to.

We are really spoiled by remotes now and almost hate to service a system without them.

Here's what we do. Adjust regulator on compressor to shutoff around 72-75 psi and operate at full open in the 50+ psi range.

We'll set and electronic clock to 3-4 minutes on the first zone allowing time to get to the compressor to turn on the air. All other zones are set to 2 min each except the last one can be anything greater than 2 minutes.

If it looks good after 2 min per zone we call it done. If not, we go back to the ones not cleared for an extra toot of air. Sometimes big spray zones with small nozzles a long distance away will take a bit longer.

While the system blows, we walk around zone by zone and make notes of any problems or potential problems that should be looked at in the spring.

Back at the office, that brief info is entered into the service required part of the customer record with a service date of Mar 1 of the next year.

It gives us a heads up on our schedule because many of our people start their own in the spring but do not repair things themselves.
__________________
Harold
Reply With Quote
  #4  
Old 08-24-2001, 09:16 PM
greasemonkey greasemonkey is offline
LawnSite Member
 
Join Date: Mar 2001
Location: Ann Arbor, MI
Posts: 57
If the system has a hydrosaver clock and a rainsensor that's wired into the rainsensor terminals on the clock, pressing the plunger in momentarily will cause the clock to advance to the next zone just as if you had pressed the advance button on the controller.

-J
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:10 AM.

Page generated in 0.07945 seconds with 7 queries