Register free!


Reply
 
Thread Tools   Display Modes
  #1  
Old 12-02-2012, 02:07 PM
Gilbert503 Gilbert503 is offline
LawnSite Member
 
Join Date: Dec 2009
Location: SALEM,OR
Posts: 45
Irrigation trailer

I'm looking on buying an enclosed trailer and will like to set it up for my irrigation division but I don't really have a clue on how to design the inside. Could anyone help me on this? Or post some pictures of their enclosed irrigation trailer?

Thanks
Posted via Mobile Device
Reply With Quote
  #2  
Old 12-02-2012, 02:15 PM
Wet_Boots's Avatar
Wet_Boots Wet_Boots is online now
LawnSite Fanatic
 
Join Date: Mar 2005
Location: metro NYC
Posts: 40,371
Are you trenching for PVC pipe, or pulling poly pipe with a plow?
Reply With Quote
  #3  
Old 12-02-2012, 02:29 PM
Gilbert503 Gilbert503 is offline
LawnSite Member
 
Join Date: Dec 2009
Location: SALEM,OR
Posts: 45
I'll be trenching.
Posted via Mobile Device
Reply With Quote
  #4  
Old 12-02-2012, 07:41 PM
Mjtrole Mjtrole is offline
LawnSite Member
 
Join Date: Aug 2006
Location: ALLEN PARK, MI
Posts: 226
Quote:
Originally Posted by Gilbert503 View Post
I'm looking on buying an enclosed trailer and will like to set it up for my irrigation division but I don't really have a clue on how to design the inside. Could anyone help me on this? Or post some pictures of their enclosed irrigation trailer?

Thanks
Posted via Mobile Device
We used a 16' with a pipe rack on top, but we used plowes and didn't really haul too much PVC, if it was a large job we had materials delivered.

We went with the thicker walls (1" so we could mount stuff to it) It was a dual axle, we parked the plow right on top of the dual axles and put 4x4's down so that the machines couldn't move back or forward and we didn't need to chain it down inside of the trailer.

On the passenger side if you opened the door straight ahead was a set a very large shelves that held rotor, sprays, valves, swing fittings and manifold parts. in the front of the trailer we originally built a nice work bench but over time we really didn't use it much so we bought large bins for PVC and just left it open for misc. stuff. And to the right of the door we placed a large 55 gal. plastic drum for shovels, brooms and hand tools, we also had another drum for garbage.

On the passenger side we had a shelf for pretty much any part you would need, starting on the bottom was the basic PVC stuff T's, 45's etc. the next up was 1 1/2" poly and the next two levels were for poly parts and above the shelving we had a lip up there to hold our trackers tool boxes and such. As the shelving went higher the bins got smaller. On the front of the shelves we drilled small holes and tied a fitting to the front of the bin so everyone knew what was supposed to be in each bin.

On the drivers side when we dropped the door down there were 2 4" pvc pipes which held boring rods and copper sticks they were framed in and on top we put a door on hinges about 8" wide and it held all of our copper materials for doing taps.

Above the pvc side we fastened 2" PVC to the walls which could hold flags, grease guns, pull grips or anything else you could think of.

The trailer worked out really well for us, we could use it on very large commercial projects to front yard residential jobs.

A couple of tips that we learned the hard way. Put good tires on it, when we had it delivered from the manufacturer the tires were compact car tires and the trailer swayed until we figured out that the tires were too small. Not only did we get a trailer to do work with but we also got a Billboard to drive around with because we spent some money on gettting it lettered up really nice which is definately worth the cost for advertising.

My brother works for a company that uses a 20' and says its way too big unless you are doing only commercial stuff.

Good luck
Reply With Quote
  #5  
Old 12-02-2012, 11:46 PM
GreenI.A.'s Avatar
GreenI.A. GreenI.A. is offline
LawnSite Silver Member
 
Join Date: Jul 2010
Location: North East
Posts: 2,097
We run a 22'x8' v-nose, it's our complete supply house on wheels. I think I have posted pics here before. Along the left side are all shelves that are 2' deep, along the right side is shelves that are 1' deep with parts bins. The very front at the v-nose entrance is separated off and where we put the rolls of Polly. When we stock it we get 4 stacks of pipe and then another 6 rolls standing up around the stacks. It's a car carrier so we have no problem putting the dingo in the middle with a few different attachments. The trailer is setup for both irrigation and lighting installs.

It works great but gets real difficult in the city when you trying to maneuver down old narrow roads with cars parked on both sides, or making a lot of corners. I have been keeping my eyes open for a cab over with 20'-24' box, side door with access steps, and a tailgate lift that can handle the dingo. Then I'll ideally do the same setup as the trailer is.
__________________
Why do people not respect us as they do other tradesmen? Because every Tom, Dick, and Harry doesn't think he can be a plumber or electrician!
Reply With Quote
  #6  
Old 12-02-2012, 11:59 PM
stebs stebs is offline
LawnSite Member
 
Join Date: Jun 2010
Location: Eastern KS
Posts: 178
Make sure you get a trailer with trailer brakes on it (this is more of an issue if you get a used trailer), and make sure you have a good brake controller in your tow vehicle too.
Reply With Quote
  #7  
Old 12-04-2012, 04:47 PM
Gilbert503 Gilbert503 is offline
LawnSite Member
 
Join Date: Dec 2009
Location: SALEM,OR
Posts: 45
Thanks for all the info. Could you guys post some pictures of the inside of the trailer.
Posted via Mobile Device
Reply With Quote
  #8  
Old 01-20-2013, 04:38 PM
koster_irrigation koster_irrigation is offline
LawnSite Bronze Member
 
Join Date: Aug 2003
Location: Wilson, NC
Posts: 1,357
I saw these pictures in the PHOTO page and throught id bring them over here
to share with this thread. THese are PR0 Turf's pictures of his setup.


__________________
NC Irrigation License 157

Since 1994
www.kosterirrigation.com
Reply With Quote
  #9  
Old 01-20-2013, 05:40 PM
Without A Drought Without A Drought is offline
LawnSite Senior Member
 
Join Date: Jul 2006
Location: New Jersey
Posts: 850
holy jesus, that trailer is immaculate. i would be afraid to work in it for fear i might track some mud inside.

that said, thats an awesome setup.
Reply With Quote
  #10  
Old 01-20-2013, 08:52 PM
Mike Leary's Avatar
Mike Leary Mike Leary is online now
LawnSite Fanatic
 
Join Date: Mar 2007
Location: Cactus Hug, Arizona
Posts: 20,565
Quote:
Originally Posted by Without A Drought View Post
holy jesus, that trailer is immaculate. i would be afraid to work in it for fear i might track some mud inside.

that said, thats an awesome setup.
Must be a one man show; my employees would trash that box in a week.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:54 PM.

Page generated in 0.07114 seconds with 9 queries