Register free!

The Green Industry's Resource Center


 
 
Thread Tools   Display Modes
  #1  
Old 07-02-2007, 01:09 PM
bsparr bsparr is offline
LawnSite Member
 
Join Date: Jun 2004
Location: McKinney, TX
Posts: 6
Blades Not Engaging

While mowing yesterday the blades disengaged on their own and now they won't engage at all. I replaced the relay switch this morning but my dealer had to order the PTO switch which should be here tomorrow. While I am waiting for the PTO switch, any ideas on what else may be causing this problem ?

Super Z 60", Honda 24hp
  #2  
Old 07-03-2007, 10:51 AM
mowerconsultant's Avatar
mowerconsultant mowerconsultant is offline
LawnSite Fanatic
 
Join Date: Feb 2000
Location: Syracuse, NY
Posts: 9,756
How old is the unit?
I would check all the wiring going to the clutch and connections.
__________________
  #3  
Old 07-03-2007, 10:57 AM
bsparr bsparr is offline
LawnSite Member
 
Join Date: Jun 2004
Location: McKinney, TX
Posts: 6
PTO Switch

My neighbor also has a Super Z, so we tried his PTO switch on my unit and that is the problem. Now I just need to wait for the dealer to get the switch in stock.

Thanks
  #4  
Old 07-03-2007, 11:00 AM
TLS's Avatar
TLS TLS is offline
LawnSite Fanatic
 
Join Date: Jan 2000
Location: N&W Philadelphia Suburbs
Posts: 7,938
Same thing happened to mine. Dealer replaced clutch under warranty, but deep down, I now feel it was just the pigtail section of wire. After they replaced the clutch, the very next day it disengaged on me....again (same exact way). Fiddled with the wires and found one connector not snapped totally in. Been fine ever since. It wasn't the connector at the clutch, it was on the other end of that pigtail wire.

But, yeah, its as if your mowing along and some ghost comes by and pushes your PTO button in. Flick in on and off several times with no luck, shut the unit down, go under and take a peek, wiggle some wires, start it up again and it's fine.

BTW....it's freakin hot under there!
__________________
TLS
2004 GMC 2500HD Reg Cab BOSS 9.2 V-Plow
2013 eXmark LazerZ X-Series 60" 34hp EFI (RED) Kohler
2006 Hustler SuperZ 28EFI 60" Power Chute Design OCDC SOLD!
Perma-green Magnum
1996 48" SCAG Belt WB 14hp Kawasaki Classic Deck
Echo 2 strokes PB-755 & SRM 280
Eastman WM20H 20" Commercial Push mower (NEW for 2013)
Commercial Lawnboy trim mower 3-FOR SALE!http://www.lawnsite.com/showthread.php?t=424203
Solo since 1980
  #5  
Old 07-03-2007, 07:35 PM
Mickhippy's Avatar
Mickhippy Mickhippy is offline
LawnSite Platinum Member
 
Join Date: Feb 2003
Location: Queensland, Australia.
Posts: 4,066
Check the fuse! Ive had a couple go out on me. Cheap and easy if thats the problem. Could try a heavier fuse!
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 11:50 AM.

Page generated in 0.07318 seconds with 8 queries