Register free!

The Green Industry's Resource Center


 
 
Thread Tools   Display Modes
  #1  
Old 06-22-2007, 12:47 PM
Accu-cut Lawn Care's Avatar
Accu-cut Lawn Care Accu-cut Lawn Care is offline
LawnSite Bronze Member
 
Join Date: Jul 2006
Location: Chattanooga, TN
Posts: 1,206
06 Super z is "flakey"

I just dropped my 2760 off at the shop for some much needed warranty repairs. To my chagrin, the problems were not fixed. The unit has 600 hrs. The left wheel is grabbing and is not as fast and powerful as the right. This makes for a very annoying situation while I'm trying to carry my stripes...not to mention the fact that it is dangerous while backing off the truck or trimming ditchhlines. The problems gets worse the more the system heats up. Dooley Tractor said that they suggest that my hydro filter be changed. IT was changed at 200 hrs; so I did not think that it was neccessary... but, I let them do that anyways. It did not fix the problem(for the second time). What is wrong with my hydraulic system? Also, my relays are shorting out every time it rains. I've already gone through 20 relays in the last year. I noticed that my hydro cooling fan is not working(relay?) since I got the mower back a couple of days ago. Is it okay to run the unit until I can get back up to Dooley(90 miles away)?
  #2  
Old 06-24-2007, 08:47 PM
mowerconsultant's Avatar
mowerconsultant mowerconsultant is offline
LawnSite Fanatic
 
Join Date: Feb 2000
Location: Syracuse, NY
Posts: 9,756
E-mail me please, I will get our regional service manager looking into your problems.
We do finally have a new relay that is sealed / waterproof, we need to make sure your unit is getting them.
I would not run the unit without the cooling fan running.

Pj
__________________
  #3  
Old 06-29-2007, 12:05 PM
Accu-cut Lawn Care's Avatar
Accu-cut Lawn Care Accu-cut Lawn Care is offline
LawnSite Bronze Member
 
Join Date: Jul 2006
Location: Chattanooga, TN
Posts: 1,206
Still no word. I hope I'm not cooking my hydro fluid.
  #4  
Old 07-03-2007, 10:05 AM
mowerconsultant's Avatar
mowerconsultant mowerconsultant is offline
LawnSite Fanatic
 
Join Date: Feb 2000
Location: Syracuse, NY
Posts: 9,756
Quote:
Originally Posted by Accu-cut Lawn Care View Post
Still no word. I hope I'm not cooking my hydro fluid.
I am in charge of your area, and I put the calls in to get this rolling....
My regional sales and the regional service manager talked to your dealer, they should of talked to you??? you have not heard from them?
__________________
  #5  
Old 07-09-2007, 04:47 PM
Accu-cut Lawn Care's Avatar
Accu-cut Lawn Care Accu-cut Lawn Care is offline
LawnSite Bronze Member
 
Join Date: Jul 2006
Location: Chattanooga, TN
Posts: 1,206
I still haven't heard anything. I've been on vacation for a week; but I had my cell on me the whole time. Now I'm backed up with a bunch of mowing...and I'm very worried about cooking my hydro oil. And with the big, high end lawns I have on this week's schedule, Dooley's loaner 2360 would not be up to the task. What am I supposed to do? Thanks
  #6  
Old 07-10-2007, 09:56 AM
mowerconsultant's Avatar
mowerconsultant mowerconsultant is offline
LawnSite Fanatic
 
Join Date: Feb 2000
Location: Syracuse, NY
Posts: 9,756
Quote:
Originally Posted by Accu-cut Lawn Care View Post
I still haven't heard anything. I've been on vacation for a week; but I had my cell on me the whole time. Now I'm backed up with a bunch of mowing...and I'm very worried about cooking my hydro oil. And with the big, high end lawns I have on this week's schedule, Dooley's loaner 2360 would not be up to the task. What am I supposed to do? Thanks
Talked with them again late yesterday afternoon, the dealer is waiting for you to bring in the mower.....
__________________
  #7  
Old 07-11-2007, 07:55 PM
Maz Maz is offline
LawnSite Member
 
Join Date: May 2004
Location: Maryville Il
Posts: 10
what is the issue with the wheel slippage I have the same issue My dealer said it was quality of gas which I know is not true. I am running a 27LC KAW 60. I currently have mine at the dealer for other repairs and would like to have him take a look at this if we know what it is.
  #8  
Old 07-12-2007, 08:09 AM
Accu-cut Lawn Care's Avatar
Accu-cut Lawn Care Accu-cut Lawn Care is offline
LawnSite Bronze Member
 
Join Date: Jul 2006
Location: Chattanooga, TN
Posts: 1,206
Thank you for helping the situation. I dropped the mower off yesterday and was treated very nicely by the folks at Dooley Tractor. I believe that Ken's (and your) input will help to finally get my hydro issue resolved. pm sent.

Ryan
  #9  
Old 07-16-2007, 09:00 AM
mowerconsultant's Avatar
mowerconsultant mowerconsultant is offline
LawnSite Fanatic
 
Join Date: Feb 2000
Location: Syracuse, NY
Posts: 9,756
Quote:
Originally Posted by Maz View Post
what is the issue with the wheel slippage I have the same issue My dealer said it was quality of gas which I know is not true. I am running a 27LC KAW 60. I currently have mine at the dealer for other repairs and would like to have him take a look at this if we know what it is.
Let your dealer know this and they can look into it.
__________________
  #10  
Old 07-16-2007, 09:01 AM
mowerconsultant's Avatar
mowerconsultant mowerconsultant is offline
LawnSite Fanatic
 
Join Date: Feb 2000
Location: Syracuse, NY
Posts: 9,756
Quote:
Originally Posted by Accu-cut Lawn Care View Post
Thank you for helping the situation. I dropped the mower off yesterday and was treated very nicely by the folks at Dooley Tractor. I believe that Ken's (and your) input will help to finally get my hydro issue resolved. pm sent.

Ryan
Good, they will take care of you.
__________________
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 06:48 PM.

Page generated in 0.09814 seconds with 10 queries