Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 09-14-2001, 09:31 PM
BensLand BensLand is offline
LawnSite Member
 
Join Date: Aug 2000
Location: North Highlands, CA.
Posts: 18
Can't find control valve

I'm tring to troubleshoot an irrigation system. One of the valves shorts out and makes the controler go nuts. I have found 9 out of 11 valves. The valves are inline valves baried in boxes in different locations in the garden any ideas how to go about finding the last two valves. I have been searching for awhile and the lawn needs some water.
Reply With Quote
  #2  
Old 09-14-2001, 10:02 PM
gusbuster's Avatar
gusbuster gusbuster is online now
LawnSite Bronze Member
 
Join Date: Mar 2000
Location: Sunny Northern California, San Francisco Bay Area
Posts: 1,485
If done right, look for an anti-backflow or vacum breaker in the area. That's hardway.

From Ca, so find a local Ewing, Horizon or United Green Mark irrigation place. They have a special machine that you can use to locate: buried pipes, valves, wires. They should rent you the machine for the day. I belive it runs around $75 a day. You may also want to ask\call these places and ask if they could come out. I know our local Ewing would for a fee.

Short of digging up the wires from clock to valves would be the only way.

John
__________________
J-LC Landscaping & Maintenance Gardening
C-27 CA. Contr# 770044
Reply With Quote
  #3  
Old 09-16-2001, 05:19 PM
greasemonkey greasemonkey is offline
LawnSite Member
 
Join Date: Mar 2001
Location: Ann Arbor, MI
Posts: 57
You need a wire tracker, these nifty devices will allow you to follow wires, find shorts, areas of high resistance, solenoids and breaks in the wire all without digging up the wire. The last I heard they cost about $400 for a basic model. I know that the guy I work for bills the wiretracker as an additional charge on the service invoice with a 1 hr minumum. The better you get at using it, the more usefull you will find it. The first time I used one I couldn't track the wire very far at all, but practice makes perfect :-). Make sure when you give the tracker a good ground. I usually use a piece of copper pipe that I clean with emery cloth before I dirve it atleast 6" into the ground. Also, try tracking from the closest place you know the wire to be. The signal does weaken as you get farther away from the signal generator.

-J
Reply With Quote
  #4  
Old 09-16-2001, 10:15 PM
HBFOXJr HBFOXJr is offline
LawnSite Bronze Member
 
Join Date: Jul 2001
Location: Southern New Jersey
Posts: 1,699
Progresive Electronics 521 wire tracker, $600-$700 dollars.

Hey G-MOnkey. How much does the boss get for a tracker. I don't charge, it's part of a professionals tool kit. But I talkked to a guy in Texas last winter that charged for it too. He also charged a misc. fee that covered glue, primer, saw and cutter blades, parer towels etc.. The things that are not defineable parts but cost money and are required and get consumed. WE now tag on $3.00 per servcie call for disposables like that.
__________________
Harold
Reply With Quote
  #5  
Old 09-17-2001, 08:40 PM
greasemonkey greasemonkey is offline
LawnSite Member
 
Join Date: Mar 2001
Location: Ann Arbor, MI
Posts: 57
He gets $35/hr w/ a 1 hr minumum. I don't think we've ever actually used it for a full hour at any one job. He's got a $6 charge for copper plumbing supplies (cutter wheels / gas / grit cloth / flux / flux brushes / fitting brushes / flints / etc...) He also has the main service guy on comission which encourages him to charge for everything he can and to not have time on the clock that he's not billing for. I'm the 1st install foreman / big service project guy (I get stuck with all the really big service problems b/c they don't have to pay me a percentage of the really big service bills like they would with the service guy).

-J
Reply With Quote
  #6  
Old 09-21-2001, 04:26 AM
LAWNGODFATHER LAWNGODFATHER is offline
LawnSite Fanatic
 
Join Date: May 2001
Location: St. Louis, Missouri Gateway to the west
Posts: 6,750
Can you tell me a www. addy for this neat device? Would it work well for electic dog fences and lousy install of irr. systems. For when we do aeration, we hit some of these and have to repair them, of course at a charge, but it happens and it would save lots of time. Plus I can mark out dog fences before we aerate, but I can use a cheep AM radio to find dog fence but it would be nice to get it on the dot so I know where it is right on the money.

LGF:blob1:
Reply With Quote
  #7  
Old 09-21-2001, 07:22 AM
HBFOXJr HBFOXJr is offline
LawnSite Bronze Member
 
Join Date: Jul 2001
Location: Southern New Jersey
Posts: 1,699
LGFather

A good tracker like I previously listed, will do what your asking and be right on the money. Not only will you know location but can determine depth of wire but not valves.

There are cheaper units including in the Progressive line but they are not the tool for a serious professional to adequately work with. I own several 521's and have used them for years. It takes practice and a little knowledge of irrigation sometimes to get what you want because people build stuff in strange ways sometimes. After you've worked on a bunch of weird jobs, the knowledge accumulates like anything else.
__________________
Harold
Reply With Quote
  #8  
Old 09-21-2001, 12:04 PM
greasemonkey greasemonkey is offline
LawnSite Member
 
Join Date: Mar 2001
Location: Ann Arbor, MI
Posts: 57
http://www.progressive.textron.com/p...rrigation.html

I've never used the 521, just the 528, which seems to be a slightly less powerful model of the 521. It works pretty well though.

-J
Reply With Quote
  #9  
Old 06-01-2002, 05:19 PM
mlgtrainer mlgtrainer is offline
LawnSite Member
 
Join Date: Jun 2002
Location: Santa Rosa, California
Posts: 6
Hey, you might want to try a "chatter box device"
All you do is attach it to the station that you can't find the valve and activate the "chatter box: and it will make that valve very noisy in the field so you can identify where it is located. Works great, you should be able to pick one up at an irrigation supply house. Maybe some others have used one before. Most irrigation techs have a few devices for locating and troubleshooting irrigation problems. Progressive Electronics makes a bunch of neat items for the irrigation tech
__________________
Manuel L Gonzales
Director of Training
Cagwin & Dorward
Reply With Quote
  #10  
Old 06-02-2002, 11:21 AM
Brickman's Avatar
Brickman Brickman is offline
Guest
 
Join Date: Mar 2002
Location: eastern WY
Posts: 1,249
I just heard about one of these, and was told that my local irrigation whole saler has one for rent. You hook your transmitter to the wire of the valve you are trying to locate at the time clock. You then have a head set and follow the wire location. I suppose that the thing beeps or some thing like that. I have seen telephone guys locating with some thing that is probably real similar.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:14 PM.

Page generated in 0.10580 seconds with 7 queries