Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 09-16-2007, 09:28 AM
LawnBoy89's Avatar
LawnBoy89 LawnBoy89 is offline
LawnSite Senior Member
 
Join Date: Mar 2004
Location: East Haven, Connecticut
Posts: 967
Shindaiwa trimmer head

You guys know how to get the head off the T261X? Gotta put a brush blade on it I can't figure it out ...thanks guys
Reply With Quote
  #2  
Old 09-16-2007, 11:33 AM
MowerMedic77's Avatar
MowerMedic77 MowerMedic77 is offline
LawnSite Bronze Member
 
Join Date: Jul 2005
Location: In the shop breaking stuff....
Posts: 1,164
Most Shindawia units have a hole in the holder plate(ref#18) that you will use to hold your blade with a corresponding notch or hole in the gear head. Usually you can use a small punch or allen to hold the assembly still while you unscrew the line head.

Check the Diagram in this older link its for a T260 head, I would think there should not be much difference. (Ref# 18 is the plate with the hole)
http://www.lawnsite.com/showthread.php?t=179359
__________________
Remember that the quality of your question directly affects the quality of your answer. Read here to learn more http://www.lawnsite.com/showthread.php?t=144040

Life is an unrelenting comedy. Therein lies the tragedy of it.

How can I soar like an eagle, when I'm surrounded by turkeys?
Reply With Quote
  #3  
Old 09-17-2007, 06:19 AM
AAELI AAELI is offline
LawnSite Senior Member
 
Join Date: May 2006
Location: Barrigada, Guam
Posts: 363
Quote:
Originally Posted by LawnBoy89 View Post
You guys know how to get the head off the T261X? Gotta put a brush blade on it I can't figure it out ...thanks guys
Most trimmers without 'bike' handlebars do not lend themselves to being used with a blade. Lack of leverage makes them unsafe. Some Shindaiwa trimmers do not have the 1" blade arbor on the gearcase which would make the attempt interesting. In fact Shindaiwa sells the C models configured to use both blade and trimmer heads, hence the designation "C".

Left hand threads on the trimmer head and as previous post you will find the hole for using the 4mm hex key that came in the tool kit will line up when rotated to the grease plug allowing you to keep gearshaft from rotating as you remove the line head.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:58 AM.

Page generated in 0.06740 seconds with 9 queries