Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 09-29-2007, 06:57 AM
Keith's Avatar
Keith Keith is offline
LawnSite Gold Member
 
Join Date: Dec 1999
Location: Central Florida
Posts: 3,817
Where to start? Lazer tracking problem.

I don't really recall when it started, but the right side just would not keep up with the left. The hydro belt is probably a year old and appears to be in good shape. The tensioner was replaced at the same time with the updated tensioner. The filter was changed in may.

Anyway, I can turn the tracking adjustment knob on the right side and pick up forward speed to match the left. But by doing so I lose most of the right side reverse speed.
Reply With Quote
  #2  
Old 09-29-2007, 09:13 AM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,775
Start with the easy things first;

Check tire pressure and diameter, I have seen tires the cord had separated in causing them to expand.

Make sure this up-dated belt tensioner is not hanging up and there is proper tension on the belt.

Check all hydro hose/line fittings for tightness, One could be sucking air but not be bad enough to leak.

Check for any worn/loose linkage/joints in the controls, Make sure the activation lever on the pump is not loose/slipping on the pump shaft.
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Quote:
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!

Last edited by Restrorob; 09-29-2007 at 09:17 AM.
Reply With Quote
  #3  
Old 09-30-2007, 07:37 PM
Keith's Avatar
Keith Keith is offline
LawnSite Gold Member
 
Join Date: Dec 1999
Location: Central Florida
Posts: 3,817
Thanks for the tips. After I got past the basics I ended up at the linkage itself, as you said. It seemed to be mostly that the set screw than holds the linkage to the pump was not tight. Once it was tightened (probably less than 3/4 turn) the slop went away and response was back. I readjusted the linkage and it seems to be pretty close to 100% right going forward and only slightly off in reverse.

I really appreciate your advice.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 04:44 AM.

Page generated in 0.06061 seconds with 7 queries