Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 10-02-2007, 04:46 PM
ferris_1972 ferris_1972 is offline
LawnSite Member
 
Join Date: Oct 2005
Location: Northeast
Posts: 59
Wright Stander Hydraulics

Can anyone tell me where the bypass valves are on a 52'' Stander when I have to bleed the system when replacing the hydraulic oil. Thanks
Reply With Quote
  #2  
Old 10-02-2007, 05:16 PM
ferris_1972 ferris_1972 is offline
LawnSite Member
 
Join Date: Oct 2005
Location: Northeast
Posts: 59
I am assuming they are the small screws on the side of the pump but just need to make sure.
Reply With Quote
  #3  
Old 10-03-2007, 10:55 AM
mcduff48's Avatar
mcduff48 mcduff48 is offline
LawnSite Member
 
Join Date: Jan 2006
Location: North Central, MD
Posts: 95
On the back of each pump there is a valve nut with a screw through it. Turn each counter clockwise one turn to open the by-pass. Make sure you don't take the valve all the way out and when you close it don't "crank down" on it. Just snug it down. You won't distort the valve seat that way.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:10 PM.

Page generated in 0.06200 seconds with 7 queries