Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 10-22-2001, 10:28 PM
scottt scottt is offline
LawnSite Senior Member
 
Join Date: May 2000
Location: Oklahoma
Posts: 269
36" toro mod.

I know it is not a problem on larger decks, but on a 36" the front of my walkbehind kept bouncing on uneven lawns and would fly up when I started in 3rd of 4th gear. To fix this problem, I welded a bracket on my sulky and on the toro just above the transmission and installed a shock absorber on it. I got a shock from a late model chevy pickup at a salvage for $10. I used removable pins to hold the shock to the brackets so it removes in just a few seconds. The only problem is I can only use 3rd and 4th gear with the shock on. This is because it blocks the gear selector. I don't use reverse or 1st or 2nd anyways. It allows me to go full speed all the time now even on bumpy yards. Total cost: $18
Reply With Quote
  #2  
Old 10-22-2001, 11:05 PM
jnjnlc jnjnlc is offline
LawnSite Member
 
Join Date: Dec 1999
Location: Charlotte, NC
Posts: 231
Hey Scott, thanks for the idea. I have a 33" Craftsman (same as Troy Built) that I have put a sulky onto. I have the same problem with the frount end bouncing off of the ground. I have added some weight to combat the problem but the front is now to heavy. I may try your mod on my mower.

By the way any dealer will tell you that you can not put a sulky on this mower. I am going to take pics and post them so all can see that you can. It is a little tricky on hills though.


Thanks
Reply With Quote
  #3  
Old 10-22-2001, 11:19 PM
scottt scottt is offline
LawnSite Senior Member
 
Join Date: May 2000
Location: Oklahoma
Posts: 269
I tried adding weight to the front of the mower but it scalped more and is much easier to get on the trailer with the shock. I can go full speed up my gate and I don't have to push the deck up or hold it down or anything, just go. It's fun doing a wheelie up the gate at full speed. The landing is really soft too.
Reply With Quote
  #4  
Old 10-25-2001, 12:46 AM
Flex-Deck Flex-Deck is offline
LawnSite Silver Member
 
Join Date: May 2000
Location: Mediapolis, IA. 52637
Posts: 2,846
Check out the Flex-Deck Manufactures forum with what "casey and Dochere" have said and seen. We are looking for input as to what is needed out there and who will work with us.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 12:39 AM.

Page generated in 0.06549 seconds with 7 queries