Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 10-29-2001, 10:06 PM
Lawnstar Lawnstar is offline
LawnSite Member
 
Join Date: Apr 2000
Location: Tennessee
Posts: 52
Toro 12.5 hp kawasaki

I'm having trouble starting my 12.5 kawasaki. No electric start, just a pull rope. The mower is 18 months old and up until about a month ago it was starting fine.

The problem is trying to get it started for the first time of the day.
I have to pull on it 15 to 20 times. Sometimes its like its flooded. Other times it seems like its not choking and I have to use starting fluid and it still takes 15 pulls very fast to get it running, if i'm not completely out of breath.

I have replaced the spark plug, fuel filter, drained the fuel tank and let it dry out thinking it might have moisture in it. Took the bowl off the carburetor. Could water get lodged in the carburetor
and remain there even after running the mower for several hours?
I have added water drier or heat to the fuel. I'm at my rows end.

Never again will I buy another large mower without an electric start. Any thoughts? Thanks
Reply With Quote
  #2  
Old 10-30-2001, 06:04 AM
Fish's Avatar
Fish Fish is offline
LawnSite Member
 
Join Date: Feb 2001
Location: Lawrenceburg, KY
Posts: 139
Remove the air filter and see if you can see if the choke flap is
closing all of the way. It may just need a simple adjustment.
It is adjusted by loosening the cable clamp and moving it.
Fish
Reply With Quote
  #3  
Old 11-01-2001, 12:33 AM
65hoss's Avatar
65hoss 65hoss is offline
LawnSite Fanatic
 
Join Date: Sep 2000
Location: Memphis, TN
Posts: 6,360
I had the same problem last year with my 12.5 kawi. I was in the JD dealership for some tractor parts and asked the mech about it. He told me that kawi chokes were bad about not closing all the way. He told me to pust the control all the way and then check the rod to see if there was still some play in it where the choke was closing more. It was. He told me to slightly bend the rod out at the V to make it close all the way. I did it and the problem solved. Although, with temps getting lower, the oil gets thicker and its still is hard to pull. I will pull it a few times and let it sit for a min. or two and the usually after 2 more pulls it cranks.

Hope this makes sense and helps.
__________________
Reply With Quote
  #4  
Old 11-06-2001, 01:26 PM
Scott182 Scott182 is offline
LawnSite Member
 
Join Date: Oct 2001
Location: Grand Rapids
Posts: 14
Is the choke closing completley. I would not recomend bending any linckage it is completly ajustable. IF it is closed and you still are having a problem I would recomend a dealer doing a leak down test. How many hour are on this unit.
Reply With Quote
  #5  
Old 11-07-2001, 12:45 AM
Lawnstar Lawnstar is offline
LawnSite Member
 
Join Date: Apr 2000
Location: Tennessee
Posts: 52
Scott, the choke is closing completely. I can see the butterfly
opening and closing. The mower has about 475 hours on it.
I put the mow in the shop last week. I have not heard anything
yet.
Reply With Quote
  #6  
Old 11-07-2001, 11:35 PM
Lawnstar Lawnstar is offline
LawnSite Member
 
Join Date: Apr 2000
Location: Tennessee
Posts: 52
I picked my mower up today. The problem was
the intake valve not seating. They had to install
a new head gasket, valve cover gasket, and intake
valve. Thank goodness it was all covered under warranty.
Now it cranks on the first pull now.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 12:32 PM.

Page generated in 0.07865 seconds with 7 queries