Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 11-01-2001, 10:30 PM
dlandscaping dlandscaping is offline
LawnSite Senior Member
 
Join Date: Aug 2001
Location: mass
Posts: 836
stihl br400 vs new br420

i have both these blowers. one is last years model and the 420 is the new "improved model." there are a few differences but i am not happy with this machine. the air filter is completely different so now i have to buy two different ones for spares, but the filter cover is easier to take off. the gas tank doesnt have a knob that fits over the opening but rather a cap that sits inside like on the oil dipsticks of old mowers and some wheeled blowers. the biggest problem with this machine is the flexibility of the blower tube. right before the throttle handle the plastic is not reeinforced and bends easily (last yr model was hard plastic). with the cheap plastic you can not change direction at all with the blower tube, you need to blow forward not to the side at all. if you do move it the plastic will bend and the airflow will be shut off, you can hear the difference and i know this isnt good for the engine when you are on full throttle and the airflow is blocked. i can not use this machine in bushes near curbs, it is practically useless for my and most likely many of your needs. i will post pics of what i am talking bout tomorow. i just wanted to give others a heads up. i should have gotten a redmax or echo.
Reply With Quote
  #2  
Old 11-01-2001, 11:30 PM
VnDrWLawnCare VnDrWLawnCare is offline
LawnSite Member
 
Join Date: Jan 2000
Location: Springfield, Illinois
Posts: 205
Friend bought one...loves it

A friend of mine just purchased one and he loves his. Are you using all of the tubes? For increased airflow take the last two tubes off. This will also help for the weight and you will not be waving a huge tube back and forth all day long. In regard to the plastic flexing, check to make sure that the tubing up by the handle is pushed in as far as it will go. I have noticed this with the older models also. In order for the tubing to not flex it needs to be pushed in as far as possible and then secure the trigger and handle bolt to your liking. You may have tried this already, i dont know. Just a few suggestions and some of my own experiences. Good luck
Keep me updated.
Eric
Reply With Quote
  #3  
Old 11-01-2001, 11:57 PM
little green guy little green guy is offline
Registered User
 
Join Date: Feb 2000
Location: Somerset County, New Jersey,
Posts: 955
I used a 420 and i had a 400, they barly even changed anything on the 420 besides a few stupid little thing. I hate the stihls anyway. I'm kinda agravated with remax too, i just bought a new eb7000 and it has less power than my eb6200. I used an echo though, that blower defintly got some power. About taking two tubes of the blower, I wouldn't do it, it decreases velosity without the tubes and makes it hard to dislodge debries and stuff.
Reply With Quote
  #4  
Old 11-01-2001, 11:57 PM
geogunn's Avatar
geogunn geogunn is offline
LawnSite Gold Member
 
Join Date: Dec 1999
Location: TN
Posts: 3,049
dlland--my br 400 is about five years old and I love it. there may have been something better out there but at the time I didn't see it.

sounds like sthil has gone backwards with this unit. dang, I hate that when it happens!

if you bought it from a dealer, take them both back and have the dealer explain why the new unit is worth the money.

GEO
Reply With Quote
  #5  
Old 11-02-2001, 08:46 AM
cutting edge cutting edge is offline
LawnSite Member
 
Join Date: Mar 2000
Location: Americus, GA
Posts: 194
Only one problem with my 420 so far - cruise control quit working.

I purchased my 420 in February at my dealers annual pro day. Did not take delivery till about two months later. I had the option of taking home a 400 that day or waiting for the 420. I felt the design improvements were worth the wait. This was hard to do considering that I was using a Craftsman handheld blower at the time.

green guy,

Most of the time I need volume and not velocity, so I carry a tube in my hand. When I need more velocity I put it on.
Reply With Quote
  #6  
Old 11-02-2001, 09:30 AM
HacMan91 HacMan91 is offline
LawnSite Member
 
Join Date: Jul 2001
Location: Montgomery, Alabama
Posts: 114
I had a echo and I didnt like throttle on the left side. My new 420 is fine, had to get used to cranking it. No primer bulb and if you pull start on choke till it fires it floods. The dealer said with the new carb, pull it on choke once and turn the choke off. It worked for me, its completely different than my other stihl equip. No redmax dealer down here so cant compare the 2. Echo and Stihl dominate the market. maybe a shind around too.
Reply With Quote
  #7  
Old 11-03-2001, 08:01 PM
dlandscaping dlandscaping is offline
LawnSite Senior Member
 
Join Date: Aug 2001
Location: mass
Posts: 836
420 update

brought it to dealer they ordered a new tubing and installing it for free but order doesnt go out till monday and it takes 5 days for stihl parts or more so two weeks itl go on. today i used it, duck tape around weak point and it wouldnt stay running strong and air filter is clean and gas is clean. same gas in the 400 and it runs fine
Reply With Quote
  #8  
Old 11-03-2001, 09:07 PM
lakegastonla lakegastonla is offline
LawnSite Senior Member
 
Join Date: Apr 2000
Location: Eastern NC
Posts: 296
br 420 is a sweet blower

I bought a br 420 two months ago, and I absolutely love it. I feel like the build quality on the stihl's are BETTER than the Shindaiwa and Redmax. Also, they use a VERY NICE filter on everything they make. Usually a 2-part job with one foam and one THICK felt filter. They fit super tight and are the best design I have seen.(and the filter is the life of your equipment) I have owned several items from each of the following: shindaiwa, lesco, and stihl. All were and still are good products, but I do feel that the Stihl line is made of more substantial materials. (Boy, I know I just made some people mad.)

PS: I would NEVER spend the extra money for a "big" shindaiwa or redmax blower over the stihl. You reach a point of diminishing returns, and for just a small bit more you could buy a push blower.No backpack is going to hang with a push blower. Debate that one!
Reply With Quote
  #9  
Old 11-03-2001, 11:49 PM
smburgess's Avatar
smburgess smburgess is offline
LawnSite Senior Member
 
Join Date: Dec 1999
Location: Richmond, Virginia
Posts: 469
I have a few 400's. I bought a 420 about a month ago, according to the dealer, stihl made the air filter change to reduce maintenance, this filter is suppose to last the ENTIRE SEASON. Well worth it in my book.
__________________
Steve
Richmond, Virginia
Reply With Quote
  #10  
Old 11-04-2001, 12:57 AM
geogunn's Avatar
geogunn geogunn is offline
LawnSite Gold Member
 
Join Date: Dec 1999
Location: TN
Posts: 3,049
Quote:
Originally posted by smburgess
I have a few 400's. I bought a 420 about a month ago, according to the dealer, stihl made the air filter change to reduce maintenance, this filter is suppose to last the ENTIRE SEASON. Well worth it in my book.
hmmm.... I don't have a problem replacing the air filter on my br-400 because I have never done it.

a couple times a year I tap it out and if anything comes out I use the air nozzle. good a new!

when I am using my br-400, all of the dust that is of concern is blown way out in front of me!

GEO
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:51 PM.

Page generated in 0.10437 seconds with 7 queries