Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 02-29-2008, 12:57 AM
qball98 qball98 is offline
LawnSite Member
 
Join Date: May 2003
Location: Arkansas
Posts: 83
Large area bid and brush hogging?

I have an opportunity to bid on a large industrial site that totals about 65 acres. About 15 of it is normal mow and trim every week and I have no problem bidding that.

I would like some input on the other 50 acres of brush hog work that they want done about every 2 weeks.

The area is about 60% relatively flat ground that should go fairly easy. The other 40% has has large drainage ditches and a retention pond that will be slower going because of the hills and ditches. It is not steep enough to be dangerous just enough to slow you down because the ditches break it up into smaller areas.

Anybody have any idea what kind of time this would take?

They told me the current guy takes about 35 hours to brush hog this but he is using a 25-30 hp tractor and a 5' hog and he is a company employee on the clock so I am sure he is in no hurry because this is all he has to do.

For equipment I am thinking of using at least an 8' pull behind hog but can go bigger if needed. The tractor I have will handle up to a 15' bat wing hog if I decide it is needed.

The going rate for this area is $55 -$65 an hour for a tractor and a 6' hog. Not sure what the rate is once you start getting bigger than that.

I don't do a lot of brush hogging so any advice would be help full as I don't want to underbid it.

Thanks
__________________
If it's not broken then don't fix it!
Reply With Quote
  #2  
Old 02-29-2008, 08:31 AM
ffemt1271's Avatar
ffemt1271 ffemt1271 is offline
LawnSite Bronze Member
 
Join Date: Apr 2003
Location: Shreveport, La.
Posts: 1,281
all i have is a 6 foot and i charge 65$/Hr. that comes out to $10.83 per hour per foot, so i would charge $162.50/Hr for the 15 foot. you'll be burning more diesel with a 15 foot too, and at over $3.50 a gallon that hurts
__________________
Deep South Lawn Service
www.deepsouthlawn.com
2003 dodge 2500/ cummins
20' landscape trailer - 6.5x12 landscape trailer
5x10 utility trailer
3- 60" lazers, 1- 72" lazer 1- 36" W/B
15 shindaiwa handhelds, 3 echo saws
36" stihl chainsaw
2 fs100rx's, 2 br600 magnum FS94R, KM90
'92 long 2360/6'king kutter w/7.5x18 trailer


lawn sprinklers save your grass, fire sprinklers save your -----
Reply With Quote
  #3  
Old 02-29-2008, 09:07 AM
gusndemboyz gusndemboyz is offline
LawnSite Member
 
Join Date: Feb 2002
Location: southern louisiana
Posts: 35
Keep in mind price difference between a 8' and a 15' is probably another 5 to 6 thousand dollars. I have been debating a 15' mower for sometime know but do not have the work yet to support it. I currently run a 8' pull behind and bid by the job not by the hour all though I do consider how long it will take me in my bid. All bushhogging is not the same and should be bid according to terrain (only my opinion).
Reply With Quote
  #4  
Old 02-29-2008, 01:57 PM
gravedigger5's Avatar
gravedigger5 gravedigger5 is offline
LawnSite Senior Member
 
Join Date: Mar 2002
Location: Edwardsville IL
Posts: 505
I have 30 acres we mow every 3 to 5 weeks (appx 8 cuts per season) Takes between 12 to 15 man hrs depending on amount of growth. some of it is open but most is broken up by hills, levies, and fence. Fence gets sprayed on seperate bid, but the rest gets trimmed (about 1.25 hrs included in the mowing hrs) I am mowing with a 9' disk mower on a 65 hp tractor and 72" ferris ztr. Your area sounds like a similar job just a few more cuttings per year. Hope this info might help. Good luck
__________________
MSD Mowing Service
Quality Lawncare That Shows
Reply With Quote
  #5  
Old 02-29-2008, 04:10 PM
packey packey is offline
LawnSite Senior Member
 
Join Date: Oct 2007
Location: Longview, Texas
Posts: 556
It's been a while but I would tell you to figure how long it will take you. if it is only 50 and it is broken up by retention pond and drainage ditches the 15 ft bat wing might bet you in trouble or slow you down. I prefer on these smaller areas to cut with a 10 ft cutter unless their is plenty of open foom for the batwing ot get in all the areas without an issue. if Iremember right you are lookig about1300-1500 a cut just on the 50 acres and another 320 on the 15 acres finish cut. If I am thinking right you will be out theri 2 days if you are solo cutting the full area. It has been along time since I have priced bush hog work though. say like since 1999. so my pric may be a little off on that but the finish cut should be close
Reply With Quote
  #6  
Old 02-29-2008, 11:37 PM
qball98 qball98 is offline
LawnSite Member
 
Join Date: May 2003
Location: Arkansas
Posts: 83
So far you guys are confirming what I thought. Here is what I have been thinking I should bid it at.

They want all the fences and some gravel parking areas sprayed with a soil sterilizer on a separate bid so there won't be much trimming on that part. They told me just get what I can with the hog around the pond and rocks in the ditches and it would be good enough. I have been leaning toward an 8-10 foot hog because of maneuverability. I figured it would take about 18 hours on the brush hogging alone. I figured the brush hogging should go for about $1350 per cut and the finish cut around the front will be done with a 72" front mount Grasshopper and should be about $625 per cut.

I know there are guys around here who could beat me on those prices but non of them have the ability to do both and they are not licensed to spray so unless they hire a 3 separate companies I should have a good chance. If they get a bid from someone who can not spray it should be a lot higher because they are going to have to trim almost 2 miles of chain link fence.

Thanks for the help if your have any more input please let me know.
__________________
If it's not broken then don't fix it!
Reply With Quote
  #7  
Old 02-29-2008, 11:49 PM
nosparkplugs's Avatar
nosparkplugs nosparkplugs is offline
LawnSite Gold Member
 
Join Date: Mar 2007
Location: Memphis, TN
Posts: 3,445
I maintain 13 miles of right of way for a pipeline starts a the Mississippi, I charge per hour $100.00 period. I am running a Kubota MX6800 56 PTO hp 4x4 with a 7ft landpride bushhog you live in Arkansas, If the johnson grass is like the grass here in Memphis your underbidding it. I move every other week and cannot keep up with the growth sometimes in section. Is their tractor 25-30 PTO hp.
Reply With Quote
  #8  
Old 03-01-2008, 01:48 AM
qball98 qball98 is offline
LawnSite Member
 
Join Date: May 2003
Location: Arkansas
Posts: 83
Quote:
Originally Posted by nosparkplugs View Post
Is their tractor 25-30 PTO hp.
Yes it is in the 25-30 HP range.

If it was all Johnson grass you would be right about underbidding that stuff is a royal pain. Of the 50 acres I would say probably 40% of it has very little grass or anything on it. The other 60% has a mix of Johnson grass, Bahia grass, some types of swamp grass and misc. weeds. Anywhere from 3-5 acres will never be cut because it is under water.

Do you think I am about right on the 18 hours with an 8-10' hog?

I will probably go up on the brush hogging price I almost always add some to what I am thinking when I actually sit down and write up the proposal. I would rather be too high and not get it than hate going there every time because I am not making enough.

What do you think of the Kubota mx6800 and the Landpride hog? I looked at some Landpride brush hogs but have never known anyone that owned one.
__________________
If it's not broken then don't fix it!
Reply With Quote
  #9  
Old 03-01-2008, 02:55 AM
nosparkplugs's Avatar
nosparkplugs nosparkplugs is offline
LawnSite Gold Member
 
Join Date: Mar 2007
Location: Memphis, TN
Posts: 3,445
It's a monster love the bevel gears on the front axles for tight turns, sips diesel, the only down side its heavy my operator got it stuck up to the axles in a sink hole last summer, it took a John Deere track hoe to get it out. Wish it was turbocharged & intercooled, can overheat if you let the radiator screen get plugged with debris. I like the land pride bushhog just replaced the gearbox in October 715.00. when we started the contract there was growth over the hood, hit many a stump, car tires on the rims bent the rims like they were sheet metal, anything bigger would be tough to transport daily. We have pushed over large trees with the loader had to work at it, powerful tractor Kubota diesels are worth the money it has variable valve timing so when it lugs down it can increase the HP & torque without any throttle adjustment, again the turbo & intercooled model would be my next tractor for the performance in the high heat. I would try to get a "open" Hour contract thats what I have no time limit Bushogging requires expensive equipment and is slow going I would stress that point. The first time is always harder than you bid it, even when you think your high with bushogging

Last edited by nosparkplugs; 03-01-2008 at 03:00 AM.
Reply With Quote
  #10  
Old 03-01-2008, 09:59 AM
gravedigger5's Avatar
gravedigger5 gravedigger5 is offline
LawnSite Senior Member
 
Join Date: Mar 2002
Location: Edwardsville IL
Posts: 505
Quote:
Originally Posted by nosparkplugs View Post
The first time is always harder than you bid it, even when you think your high with bushogging
Thats the truth! I try to shy away from one time jobs or bid extra high for that reason.

qball98, Just don't under bid the job. And don't freak out after the first cut and way over on time. If it is broken up like you said it will take several cuttings to become efficient at that property especially if you are going to be using a new piece of equipment your not quite comfortable with yet.
__________________
MSD Mowing Service
Quality Lawncare That Shows
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:23 AM.

Page generated in 0.11428 seconds with 7 queries