Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 03-09-2008, 04:14 PM
chefwong chefwong is offline
LawnSite Member
 
Join Date: Mar 2008
Location: NYC
Posts: 11
Can too MUCH PSI be overkill

I've been looking for a pressure washer for home use. Driveways, Siding, brickwork, car washing, etc. From my research, it looked like 3.K PSI was the ideal for concrete washing.

Local Lowes has Simple Green PW solution. I gave them a call and was happy with the info they provided between their siding vs. concrete cleaner.

For the machine, I've decided on the following + matching nozzle. Other than possibly a longer hose, is there anything out of the obvious I'm missing

4GPM 3.5K PSI Belt Driven Washer
http://pressuretek.com/beltdirivencat.html

Roto Nozzle
http://pressuretek.com/idkse47psi.html
Rotojet also seems to make 3-4 lines of turbojet nozzles not offered by Ptek.
Any recommendations. General, Rotojet 3000 or 5000 Series, Rotomax, Suttner ??

Gauge
http://pressuretek.com/qico0psistst.html
Should be useful to see how low I am attentunating the pressure ?
Reply With Quote
  #2  
Old 03-09-2008, 04:49 PM
Toy2 Toy2 is offline
LawnSite Bronze Member
 
Join Date: Jan 2005
Location: Waco, Texas
Posts: 1,926
Sears

I have a 2200psi from Sears, cleans brick homes, cars, trucks, mowers, decks, etc...works for me. Adjustable nozzle, will shred a towel in pinpoint mode.

My buddy got a 3000+psi, his young son was running by him as he was washing his mowers, got hit in the face below his eye, cut it like a hot knife through butter....to much power for my needs...
Reply With Quote
  #3  
Old 03-09-2008, 05:48 PM
PLM-1's Avatar
PLM-1 PLM-1 is offline
LawnSite Bronze Member
 
Join Date: Aug 2004
Location: Joplin MO
Posts: 1,640
I have a 2500psi machine and to me, it's not nearly enough. My parents have a 3000psi and it would suit my needs better. The 2500 just doesn't have the power unless you are right on top of your target area. And if you are, the "cleaning area" is so small it takes forever.
__________________
Impact Property Solutions, LLC
"Bring Impact To Your Property"
2011 GMC 2500HD Denali Duramax
7'x18' Custom Open Trailer
7'x12' Big Tex Open Trailer
8.5'x24' King American Enclosed
2006 Grasshopper 928D 61" (4,700 hrs!! )
2011 Grasshopper 930D
2005 JD 737 60"
Snapper 21" Hi-Vac Commercial
Lawnboy 21" Duraforce x2
Shindaiwa: T2500 | T231 | T242 | LE261 | EB630RT | 488 | DH2510 | RS76S
Tanaka: TBC-255PF | TBC-280PF | TPH-270PF
Fisher 8'6" Extreme V SS
Reply With Quote
  #4  
Old 03-09-2008, 06:30 PM
squirtgun's Avatar
squirtgun squirtgun is offline
LawnSite Member
 
Join Date: Apr 2007
Location: Southwest Ga
Posts: 88
PSI is relevant to the surface being cleaned.
__________________
Karvonen's Pro Clean
Southwest Georgia
Scott Karvonen
www.georgiaproclean.com
PWM
Reply With Quote
  #5  
Old 03-09-2008, 07:12 PM
chefwong chefwong is offline
LawnSite Member
 
Join Date: Mar 2008
Location: NYC
Posts: 11
The hardest surface I would be cleaning is

- concrete driveway
- stonework on the facade of the house
- brick (which is not too hard)

A better question, is I read a post where it suggested to keep the pressure washer at full PSI and just rate the nozzle/head accordingly.

For example, on the rotary nozzles, if I have a PW rated at 3.5K PSI, and it's suggested that 3K + is ideal for concrete, do I buy a nozzle rated at 4K ?

The same goes for the stonework . Without an extension wand, do I buy a nozzle rate at 2.5K ?
Reply With Quote
  #6  
Old 03-09-2008, 10:31 PM
squirtgun's Avatar
squirtgun squirtgun is offline
LawnSite Member
 
Join Date: Apr 2007
Location: Southwest Ga
Posts: 88
IMO, a turbo nozzle is not a wise investment.I don't own one and have been in buisness over 5 yrs,They have there uses,but I haven't found anything I can't clean using regular qc tips.
If you plan on dealing with Bob he can tell you what over sized tips you will need to clean various surfaces.Since the gpm on my machine is larger than what you plan on buying the tips sizes are different.
__________________
Karvonen's Pro Clean
Southwest Georgia
Scott Karvonen
www.georgiaproclean.com
PWM
Reply With Quote
  #7  
Old 03-14-2008, 03:25 PM
S DIAMOND's Avatar
S DIAMOND S DIAMOND is offline
LawnSite Member
 
Join Date: Mar 2008
Location: South
Posts: 108
Pressure Adjustments

Gauge
http://pressuretek.com/qico0psistst.html
Should be useful to see how low I am attentunating the pressure ?[/QUOTE

There are many paths that lead to the road known as pump failure. Here are just a few reasons why.

1) Tampering with the unloader. (Trying to get more PSI)
2) Adjusting engine speed (over-speeding attempting to get more GPM)
3) Overheating water supply (by pass mode to long)
4) Insufficient lubrication (pump maint.)
5) Inadequate water supply (pump starvation aka cavitation etc.)

PSI is the necessary "FORCE" required to break the bond between the surface and the soiled area being cleaned. Depending on that surface (Garage floor vs. Wooden deck) will determine the force you will need. If you have a "TRUE" 3000PSI rig, then obviously that is too much for a wooden deck, but great for maybe a sidewalk. Changing tips (not angle of degree) but orifice sizes is NOT the best way to alter your pressure output. Physical distance from the surface (reducing impact), or a dual lance wand with a flow control valve will lessen the force and possibly the damage. The advantage of the D.W. is that the GPM is still there, but the pressure drops. GPM is the flow that is required to move you quickly through the cleaning process. This is what the PROs are usually looking at. It seems the key, however, is properly treating the surface with the "right chemical" to help expedite the process. Unfortunately, I don't power wash for a living, and this is just M.H.O. However, I do repair pressure washers, so I do know this...
Chefwong, if you are going to pressure test your pump, and you should, because its a good bench mark where your pump's health is, do the following:

1). Use a "known tip" (that's a new one, or good one) with the CORRECT orifice size designed for THAT PUMPS RATING.
2). Make sure the engines RPM's is CORRECT. Yes, you will need a good tach.
3). Make sure you have a good glycerin filled gage with adequate pressure overhead. (a couple 1000PSI over pumps rating, at least).
4).Make sure you have adequate water flow from the garden hose. If your unit is rated at 4GPMs a minute, than you should be able to fill 4 gallons in one minute into a container with your pressure washer completely hooked up. (with or without tip. less messy without) Yes, time it. Rule of thumb: you should have at least 5GPM at your garden hose spigot anyway.
5). Now, don't be alarmed if your unit is a little off from the "Factory" rating. That is normal. However if you have done the proceeding, and its off several hundreds of PSI, you may have a problem. Remember this, your new pump will need a small time period for break in before you get the best reading, and more importantly, you loose about 200PSI across the unloader when reading the test gage.

WARNING, ADJUSTING YOUR UNLOADER CAN BE VERY DANGEROUS!
I know there are some people who don't care, so if you do adjust your unloader know this:

1) Follow the previous set up above.
2) With the engine running, water flowing, and correct tip in place, slowly turn in the unloader screw, and watch the pressure rise. Release the trigger and note the back pressure. The back pressure is the PSI increase when you release the trigger and the unloader bypasses. ( HERE IS THE KEY. THE BACK PRESSURE SPIKE SHOULD NOT BE MORE THAN 12% OF THE OVERALL PRESSURE). continue with the adjustment (adjust and release) As you keep turning, you will reach a point where the pressure will not increase, but the back pressure spike will. Continuing to adjust past this point will be dangerous!!! {If your pressure washer is rated at 3000PSI, and all you can get is 2600PSI with an acceptable back pressure rating. THEN STOP. THAT'S IT. I have seen units come in (damaged of course) rated at 3500PSI with a back-pressure rating of 4800PSI. I'm surprised the hose didn't't burst.
I hope this helps some.
Reply With Quote
  #8  
Old 03-19-2008, 08:20 AM
FCPWLLC's Avatar
FCPWLLC FCPWLLC is offline
LawnSite Senior Member
 
Join Date: Jan 2007
Location: Lexington, KY
Posts: 347
Quote:
Originally Posted by S DIAMOND View Post
Gauge
http://pressuretek.com/qico0psistst.html
Should be useful to see how low I am attentunating the pressure ?[/QUOTE

There are many paths that lead to the road known as pump failure. Here are just a few reasons why.

1) Tampering with the unloader. (Trying to get more PSI)
2) Adjusting engine speed (over-speeding attempting to get more GPM)
3) Overheating water supply (by pass mode to long)
4) Insufficient lubrication (pump maint.)
5) Inadequate water supply (pump starvation aka cavitation etc.)

PSI is the necessary "FORCE" required to break the bond between the surface and the soiled area being cleaned. Depending on that surface (Garage floor vs. Wooden deck) will determine the force you will need. If you have a "TRUE" 3000PSI rig, then obviously that is too much for a wooden deck, but great for maybe a sidewalk. Changing tips (not angle of degree) but orifice sizes is NOT the best way to alter your pressure output. Physical distance from the surface (reducing impact), or a dual lance wand with a flow control valve will lessen the force and possibly the damage. The advantage of the D.W. is that the GPM is still there, but the pressure drops. GPM is the flow that is required to move you quickly through the cleaning process. This is what the PROs are usually looking at. It seems the key, however, is properly treating the surface with the "right chemical" to help expedite the process. Unfortunately, I don't power wash for a living, and this is just M.H.O. However, I do repair pressure washers, so I do know this...
Chefwong, if you are going to pressure test your pump, and you should, because its a good bench mark where your pump's health is, do the following:

1). Use a "known tip" (that's a new one, or good one) with the CORRECT orifice size designed for THAT PUMPS RATING.
2). Make sure the engines RPM's is CORRECT. Yes, you will need a good tach.
3). Make sure you have a good glycerin filled gage with adequate pressure overhead. (a couple 1000PSI over pumps rating, at least).
4).Make sure you have adequate water flow from the garden hose. If your unit is rated at 4GPMs a minute, than you should be able to fill 4 gallons in one minute into a container with your pressure washer completely hooked up. (with or without tip. less messy without) Yes, time it. Rule of thumb: you should have at least 5GPM at your garden hose spigot anyway.
5). Now, don't be alarmed if your unit is a little off from the "Factory" rating. That is normal. However if you have done the proceeding, and its off several hundreds of PSI, you may have a problem. Remember this, your new pump will need a small time period for break in before you get the best reading, and more importantly, you loose about 200PSI across the unloader when reading the test gage.

WARNING, ADJUSTING YOUR UNLOADER CAN BE VERY DANGEROUS!
I know there are some people who don't care, so if you do adjust your unloader know this:

1) Follow the previous set up above.
2) With the engine running, water flowing, and correct tip in place, slowly turn in the unloader screw, and watch the pressure rise. Release the trigger and note the back pressure. The back pressure is the PSI increase when you release the trigger and the unloader bypasses. ( HERE IS THE KEY. THE BACK PRESSURE SPIKE SHOULD NOT BE MORE THAN 12% OF THE OVERALL PRESSURE). continue with the adjustment (adjust and release) As you keep turning, you will reach a point where the pressure will not increase, but the back pressure spike will. Continuing to adjust past this point will be dangerous!!! {If your pressure washer is rated at 3000PSI, and all you can get is 2600PSI with an acceptable back pressure rating. THEN STOP. THAT'S IT. I have seen units come in (damaged of course) rated at 3500PSI with a back-pressure rating of 4800PSI. I'm surprised the hose didn't't burst.
I hope this helps some.
Good post.....

I do however, believe that using larger oriffice tips is ideal for lowering pressure. Dual lance is great if cleaning flat surfaces needing the angle. We shoot high Vinyl with zero degree tips but use large (40) oriffice to reduce pressure and can draw chem from downstream injector.

Great advice on leaving the unloader alone except to properly adjust for rated gpm/psi.
__________________
Michael Kreisle
First Choice Power Washing LLC
Lexington, KY 859-983-5955
Awesome Pressure Washing and Great Cleaning Service
Follow us on Facebook.. facebook.com/powerwash
Reply With Quote
  #9  
Old 03-19-2008, 03:43 PM
S DIAMOND's Avatar
S DIAMOND S DIAMOND is offline
LawnSite Member
 
Join Date: Mar 2008
Location: South
Posts: 108
Thanks FCPWLLC. I do try to help. I do agree that the tip (orifice) change is the fastest way to alter pressure vs. flow, and it reads as if you definitely understand those dynamics. However, most homeowners and some "pros" tend to pay less attention to those details, and mistakenly replace their existing (original) tips with either under or oversized ones, not realizing the overall effect, that is until something doesn't seem right. That's when I get to see them.
Reply With Quote
  #10  
Old 12-28-2009, 12:28 AM
blake101 blake101 is offline
LawnSite Senior Member
 
Join Date: Oct 2008
Location: Columbus,MS
Posts: 448
Quote:
Originally Posted by S DIAMOND View Post
Thanks FCPWLLC. I do try to help. I do agree that the tip (orifice) change is the fastest way to alter pressure vs. flow, and it reads as if you definitely understand those dynamics. However, most homeowners and some "pros" tend to pay less attention to those details, and mistakenly replace their existing (original) tips with either under or oversized ones, not realizing the overall effect, that is until something doesn't seem right. That's when I get to see them.
From what I have read you are saying that putting the wrong tip on it can damage the pump. Can you please explain, not guessing your information, I just don't understand.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:12 PM.

Page generated in 0.13179 seconds with 7 queries