Register free!


Reply
 
Thread Tools   Display Modes
  #1  
Old 04-12-2008, 09:26 PM
WildLake's Avatar
WildLake WildLake is offline
LawnSite Senior Member
 
Join Date: Mar 2004
Location: Maryland
Posts: 367
Sprayer tip options

I am trying to get 25gal to cover atleast one acre for broadleaf apps.
http://www.nationwidewholesaledirect...84/1830178.htm This is an example of a setup. Would I be looking at change nozzles, pressure, both, or what.

As long as I apply the product amount per sqft. correctly, can I cut the carrier down to what I want, or is there a min amount of carrier that I must use. Let me know if I'm way off on this stuff.

Any help would be greatly appreciated.
Reply With Quote
  #2  
Old 04-12-2008, 10:55 PM
RigglePLC's Avatar
RigglePLC RigglePLC is online now
LawnSite Fanatic
 
Join Date: Jul 2006
Location: Grand Rapids MI
Posts: 9,558
Should work--if--you reduce the pressure to a low rate so as to apply about a half gallon per 1000 sqft.
Reply With Quote
  #3  
Old 04-13-2008, 08:52 PM
hmartin hmartin is offline
LawnSite Senior Member
 
Join Date: Sep 2004
Location: MS, zone 7b
Posts: 590
All you need to do is adjust your ground speed. Practice with water until you get a complete tank to cover an acre.
Reply With Quote
  #4  
Old 04-13-2008, 11:19 PM
WildLake's Avatar
WildLake WildLake is offline
LawnSite Senior Member
 
Join Date: Mar 2004
Location: Maryland
Posts: 367
thanks guys
Reply With Quote
  #5  
Old 04-13-2008, 11:46 PM
rcreech's Avatar
rcreech rcreech is offline
LawnSite Fanatic
 
Join Date: Feb 2007
Location: OHIO
Posts: 5,717
The only way you will know what you need to do is calibrate, calibrate, calibrate.

There are really only two good ways to change your rate:
1) Speed
2) Tip size

You can change your rate some with pressure...but only small increments, and that is not a good idea.

Find a comfortable speed and then find the tip to match your speed best for your rate. Then adjust your pressure just to get the correct micron size/pattern.

If you are only spraying broadleaves I would go a lot lower then 25 gallon/ac.

If I were you and there isn't a lot of concern for drift...I would be down around 10-12 gallon/acre.

You will get awesome control and will be able to cover twice the acres with one tank!
Reply With Quote
  #6  
Old 04-15-2008, 08:51 PM
DOUBLEGHAMMER DOUBLEGHAMMER is offline
LawnSite Member
 
Join Date: Aug 2007
Location: Louisville, Ga
Posts: 18
i have a similar set up , ihave a 2gpm pump set at 18 psi running 3.5 ground speed with 3 tee-jet turbo #08 set at 20 inch spacing covering 5 feet . My tank is 25 gal i fill it with 20 gal to spray 1/2 acre. I spray 40 gal per acre.Hope this helps
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:21 PM.

Page generated in 0.07375 seconds with 7 queries