Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 12-13-2001, 10:13 PM
AA961JESTER AA961JESTER is offline
LawnSite Member
 
Join Date: Dec 2001
Location: NEW JERSEY
Posts: 48
48 Ransome Bobcat. Need Help...

I JUST STARTED IN THE LANDSCAPE BUSINESS AFTER BEING IN THE SNOWPLOWING BUSINESS FOR A LONG TIME. I JUST BOUGHT A USED 48" RANSOME BOBCAT WITH A 12.5 KAWASAKI. THIS UNIT IS AT LEAST 10 YEARS OLD. THE MOTOR STARTS RIGHT UP AND RUNS STRONG. DOES ANYONE KNOW WHERE TO FIND THE MODEL NUMBER. I AM LOOKING FOR A REPAIR MANUAL WITH DIAGRAMS AND PART NUMBERS. THE DRIVE LINKAGE IS MISSING AN SO THE MOWER ONLY GOES AT ONE SPEED. THE PREVIOUS OWNER ADJUSTED THE DRIVE SPEED BY VARYING BELT LENGTH, HOWEVER IT IS FAST AND CAN ONLY BE SLOWED BY REDUCING THE THROTLE WHICH ALSO REDUCES BLADE SPEED. ALSO DOES ANYONE KNOW WHERE TO GET A GRASS GOBBLER CHEAP. WHAT TYPE OF BLADES DO YOU EXPERIENCED LAND SCRAPERS RECOMMEND. :blob1:
Reply With Quote
  #2  
Old 12-14-2001, 02:03 AM
vipermanz's Avatar
vipermanz vipermanz is offline
LawnSite Bronze Member
 
Join Date: Mar 2001
Location: Birmingham Alabama
Posts: 1,780
i would look around the engine or transmission
__________________
<img src="http://img.photobucket.com/albums/v404/vipermanz/Newbanner.jpg" alt="Image hosted by Photobucket.com">
Check Out Weldingweb !!!
Reply With Quote
  #3  
Old 12-14-2001, 04:45 AM
Richard Martin's Avatar
Richard Martin Richard Martin is offline
LawnSite Fanatic
 
Join Date: Mar 2000
Location: Greenville, NC
Posts: 14,499
Just take the whole mower to your local Bobcat dealer. They can show you or tell you the model and serial number of the mower. For inexpensive metal grass catchers try your local Landscaper Supply store or if you don't have one local go to their web site at www.landscapersupply.com. I am using Gator Magnum blades also available at Landscaper Supply.
__________________
Serving Greenville, Winterville and Ayden NC



Reply With Quote
  #4  
Old 12-16-2001, 05:58 PM
AA961JESTER AA961JESTER is offline
LawnSite Member
 
Join Date: Dec 2001
Location: NEW JERSEY
Posts: 48
I took the unit to a local guy who advertises bobcats to find out he is not a bobcat dealer. The guy didnt seem to want to tell me anything about my unit except that he reccomends I do not make the repairs but leave it for his techs to service. I guess I look like I was born yesterday. All I want is to find a service manual for this machine. Can somebody please help. I looked very carefully around the engine and gearbox for a model number but could find none. This machine has been painted at least three times so if there was a plate it's probably long gone.
Reply With Quote
  #5  
Old 12-16-2001, 08:50 PM
heybruck34's Avatar
heybruck34 heybruck34 is offline
LawnSite Senior Member
 
Join Date: Dec 2001
Location: Charlotte NC
Posts: 300
Jester-
I'm not sure if they offer a REPAIR MANUAL. I have found an "exploded parts diagram". Try this website...

http://www.j-thomas.com/catalog.html

Go down to whatever brand you're looking for. I think the only one they don't have online is Scag.

If you can find the serial number I would call the manufacturer and they should be able to tell you the year it was made and the model. Hope that helps.

We seem to be doing the same thing- rebuilding old walk-behinds. Check out my thread-
Advice on buying a USED walk-behind.

-Jeff-
__________________
"Now the guy's gotta come up with Paulie's money every week no matter what...'Business bad?- screw you, pay me.' 'Oh, you had a fire?- Screw you, Pay me.' 'Place got hit by lightning huh?, SCREW YOU, PAY ME'

- Ray Liotta as Henry Hill in Goodfellas
Reply With Quote
  #6  
Old 12-17-2001, 01:59 PM
General Grounds General Grounds is offline
LawnSite Senior Member
 
Join Date: Jan 2001
Location: Manalapan,nj
Posts: 902
:blob3: Jester are you looking for a manual for the engine or for the machine it self? T
Reply With Quote
  #7  
Old 12-17-2001, 06:07 PM
AA961JESTER AA961JESTER is offline
LawnSite Member
 
Join Date: Dec 2001
Location: NEW JERSEY
Posts: 48
to heybruck,
thanks your site gave me alot of help. there are still things i am looking for like the deck cover and throtle mounting plate, but what you gave me is a great start.

to general grounds
i am looking for a manual for the machine itself. the 5 speed is not working and the previous owner adjusted the speed by varying the belt length. from what i see underneath there is a belt with a spring that is supposed to connect, through linkage to a five position "shift lever". i want to repair this to be able to adjust the speed on the fly without cutting back the throtle.

does anyone know if these older bobcats have a reverse gear?

if you guys are thinking that it sounds like i am going through alot of work, consider i only paid two hundred for the unit.
Reply With Quote
  #8  
Old 12-17-2001, 06:27 PM
General Grounds General Grounds is offline
LawnSite Senior Member
 
Join Date: Jan 2001
Location: Manalapan,nj
Posts: 902
:blob3: Jester you can go to any bobcat dealer and ask them to order you owners manual, it may cost you about 10.00. T
Reply With Quote
  #9  
Old 12-17-2001, 10:58 PM
turtle turtle is offline
LawnSite Member
 
Join Date: Dec 2001
Location: Terryville Ct.
Posts: 75
Yes bobcats do have a reverse gear (doesn't work too well, usually the pullys just spin) the tranny is probally a peerless (basicly the same tranny on all belt-drive mowers), The sping loaded pully should be for the parking brake, there should be a lever coming off the top of the gearbox. I don't know how easy it is to find a manual seeing as bobcat mowers are made by Textron now. If your wondering why I know so much about these mower, the company I work for runs three of them the oldest is 9 years and the youngest is 6 years. I've spent 5 years off and on running them without any major problems that couldn't be blamed on carelessness. Good luck with yours it should serve you well and you goy a great deal.
Reply With Quote
  #10  
Old 12-26-2001, 03:51 PM
Grassman Grassman is offline
LawnSite Member
 
Join Date: Aug 2000
Location: Lakeland Fla.
Posts: 203
Sounds to me like you have a variable speed mower thats no longer varaiable speed. Your ID plate should be directly behind the engine ,on the left side if your standing behind the mower. If it's the mower I think it is, the model # is XM48008. I've been using Bob Cats for 14yrs. Hope this helps, Russ
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:14 AM.

Page generated in 0.10357 seconds with 7 queries