Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 01-15-2002, 09:42 PM
Turfer Turfer is offline
LawnSite Member
 
Join Date: May 2000
Location: Cary, North Carolina
Posts: 99
Hydro oil change - Great Dane Chariot

I searched the archives but I still don't feel comfortable after changing my hydro oil today. Here is the sequence I followed after reading the Great Dane coloring book manual.

-Made sure everything was clean.
-Removed reservoir top and filter.
-Disconnected line from each pump and drained.
-Disconnected line between each pump and drained.
-Loosely re-connected each line.
-Filled new filter, 15w50 mobil 1, and attached.
-Filled reservoir.
-Disconnected each line from above and re-connected after flow started. (bleeding procedure)
-Raised wheels and ran in forward for 1 minute and reverse for 1 minute.
-Checked reservoir and added 15w50 until full.

It seems to be running good with no hydro noise. I just want to make sure I don't ruin a pump. How do I know if air is in the system and how do I get rid if it ? Thanks.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:11 PM.

Page generated in 0.06459 seconds with 9 queries