Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 06-24-2008, 08:26 AM
lilmarvin4064's Avatar
lilmarvin4064 lilmarvin4064 is offline
LawnSite Senior Member
 
Join Date: May 2005
Location: transition-zone
Posts: 746
Commercial Scotts spreaders

I'm looking at some products with different spreader settings on the bags for Scotts R7-X, and R8-A. Do either of these coincide with the SR-2000? Thanks
Reply With Quote
  #2  
Old 06-24-2008, 09:42 PM
maelawncare's Avatar
maelawncare maelawncare is offline
LawnSite Senior Member
 
Join Date: Aug 2002
Location: Rolla, Missouri
Posts: 412
man im wondering the same thing. and i never can understand the cone setting. i wish they would just come out with a dam manual and not just calibrate instructions.
__________________
Reply With Quote
  #3  
Old 06-24-2008, 09:56 PM
americanlawn's Avatar
americanlawn americanlawn is offline
LawnSite Fanatic
 
Join Date: May 2006
Location: midwest
Posts: 5,638
Only way to correctly apply products with a spreader is to test drive it -- then throw the manufacturer's settings out the window cuz they are usually wrong. After 2 or 3 lawns, you should be at a correct setting if you are able to add up the number of pounds used after treating these lawns.

Otherwise, just put it on setting number ???
__________________
Proud subscriber of TURF Magazine. (thanks Ron)
Reply With Quote
  #4  
Old 06-24-2008, 10:29 PM
Joshuakwhit's Avatar
Joshuakwhit Joshuakwhit is offline
LawnSite Member
 
Join Date: Mar 2008
Location: Mt. Juliet, TN
Posts: 219
All right I be running a SR-2000 for a while now the cone setting allows for a left to right throw pattern. Like when edging set the cone to 1, or spreading dylox a lighter material you would need to turn the cone to 5,6, or so to make the throw pattern straight. As far as the setting for ferts, right now we are throwing 22-0-8 or 25-0-12 @ 3lbs. per 1000 the setting needs to set between I & J. for 22-0-8 @4lbs./1000 setting L & M.

By the way where did you purchase the SR-2000 and how much did you pay for it?
Reply With Quote
  #5  
Old 06-24-2008, 11:57 PM
Victor's Avatar
Victor Victor is offline
LawnSite Bronze Member
 
Join Date: Mar 2000
Location: Columbus, OH
Posts: 1,635
I've found the best way to adjust the "helical cone" on my SR2000 is to go by the SGN of the fertilizer I'm spreading. If the fertilizer I'm spreading has larger prills (a higher SGN), then I set the helical cone to a higher adjustment number. Fertilizer with smaller sized prills (lower SGN ratings) spread more evenly for me with a lower numerical setting of my helical cone.
__________________
Vic Cundiff
Owner, Par 5 Lawn Care
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:42 AM.

Page generated in 0.07122 seconds with 7 queries