Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 01-09-2000, 11:20 AM
bob's Avatar
bob bob is offline
LawnSite Platinum Member
 
Join Date: Dec 1999
Location: DE
Posts: 4,242
HAS ANY ONE TRIED E-Z GATE? THEY HAVE BEEN ADVERTISING IN THE TRADE MAGAZINES FOR ABOUT A MONTH NOW.<p>----------<br>robert bender<br>
Reply With Quote
  #2  
Old 01-09-2000, 11:44 AM
Eric ELM Eric ELM is offline
Husband, Father, Friend, Angel
 
Join Date: Dec 1999
Location: Chicago, IL USA
Posts: 4,831
Bob, I haven't tried theirs, but I built a system 2 years ago and theirs is almost like mine. You can see pictures and an article on my website. I have heavy duty gate weighing around 100 pounds. and I can lift it with one finger. <p>----------<br>Eric@ELM<br>http://pages.prodigy.net/eric.erickson/index.html
Reply With Quote
  #3  
Old 01-09-2000, 12:24 PM
accuratelawn accuratelawn is offline
LawnSite Senior Member
 
Join Date: Dec 1999
Location: SW Missouri
Posts: 922
Bob, <br>I have seen them advertised for $89.00 in the magazines and $129.00 on a web site. I looked at the photos Eric had on his web page and built my own. <br>Parts- Garage door spring<br>two 5/16 eye bolts<br>two lock loops to connect the spring to the eye bolts<br>some steel cable<br>and two pulleys- garage door parts<br>I made it without welding. <br>Cost $45 and a couple hours to figure it out.<br>Hint mount the two pulley as far back as you can on your rails. Run the cable under the first and over the second.<br>Hope this helps.
Reply With Quote
  #4  
Old 01-10-2000, 12:27 AM
mowerparts mowerparts is offline
LawnSite Member
 
Join Date: Dec 1999
Location: Jacksonville Fl
Posts: 110
Not only did I buy an EZ-Gate, I also sell them. This is one of the better investments that I have made. The prices very but it is well worth the price. You can put the gate down with one hand and pick it up with two fingers. It might cost about $50.00 to make yourself in parts but when you add labor and all the running around it cost about the same.<br>EZ-GATE comes with a 1 year warranty and a 60 day money back guarantee.<br>If you want to see a picture (its a little fuzzy but you get the idea) go to the directory under lawn care/commercial/Belts, Blades and More!<p>----------<br>http://mowerparts.hypermart.net<p>
Reply With Quote
  #5  
Old 01-16-2000, 04:10 PM
jeffclc
Guest
 
Posts: n/a
I made one somewhat similar to the ez gate. I bought all the parts at Home Depot for $30, including the garage door spring. Some eye bolts, a piece of 2&quot; PVC, come cable, and a couple of small pullyes. <p>I made a bracket to hold the pulleys. I welded two pieses of stee; to a flat piece that bolts to the trailer. you could do it with out welding, as long as you can get a little creative with the pulley setup. <p>Took about 2 hours to design and build. Works pretty good, but I may make a few adjustments to the tension, after I start using it more often.
Reply With Quote
  #6  
Old 01-16-2000, 05:41 PM
Lazer Lazer is offline
LawnSite Bronze Member
 
Join Date: Jan 2000
Posts: 1,446
We have no springs on our gates. In fact, we put additional weight on our gates so the guys do a little little &quot;weight training&quot; and don't need to go to gym everday.<p>I'm into the innovative products, but the EZ-Gate....?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 10:49 PM.

Page generated in 0.08265 seconds with 9 queries