The Green Industry's Resource Center

Thread Tools   Display Modes
Old 03-04-2010, 08:39 PM
Southernlandscape343's Avatar
Southernlandscape343 Southernlandscape343 is offline
LawnSite Member
Join Date: Sep 2008
Location: Alpharetta, GA
Posts: 167
Originally Posted by hornett22 View Post
Good advice on here.

Does any manufacturer besides Scag use blade spacers?

It's amazing how much you can fine tune the cut on the Scags.
It's kind of funny that you mention Scag, I went to bass pro the other day and Scag had a bunch of mowers on display. I talked with both Scag employees along with dealers themself. I was quite impressed in the entire line up that they have, not to mention the durability of the machines. It really seems like Scag does alot of testing before they put a product out on the market, and it also seems that they listen to their customer's feedback.
I'm thinking about stepping it up to a 36" WB. I went to my nearest Scag dealer and they are also a Hustler dealer. I looked at the hustler, and also liked it alot too. I'm rather torn between the two. I like the Trimstar's design especially compared to the V-Ride that Scag offers (handle style).
With the Trimstar I noticed right away that the very front of the deck was welded closed.. therefore not leaving a gap between the baffle itself and the front of the deck. I'm not sure if this would really affect the cut or not. Then again I like how Scag has the Advantage deck with the custom built baffle, that is adjustable.
For a 09 never used Scag 36" WB with a 16hp Kawasaki (brand new condition) I could get it for $3100. However I am (if accepted.. which I should be) Going through the police academy from may-july which is mon-friday 8-5, so really I'd have two days a week to mow. With the econemy the way it is right now I am not sure what I should try to do. I recently repainted the deck of the ferris, I also played with the throttle a little bit and the engine sounds a bit better. I am going to check on the belt tension in just a minute to see if that is what is causing the cutting issue. In the mean time.. does anyone have experience with Scag/Hustler W/B mowers? What would you personally recommend?
Lifted 05 Chevrolet Trailblazer w/ Z71 suspension - Emergency lighting and push bumper
8ft trailer with trimmer rack
07 32" Ferris Hydrocut (new paint)
Craftsman 21" 7hp mower
Ariens LM22s 22" Walk behind mower
Stihl FS 90R Trimmer (2011)
Stihl FC 90R Edger (2011)
Stihl BR-600 (2012)
Husqvarna 125BT Backpack blower
Husqvarna 455 Rancher (professional chain)
Poulan "wild thing"
Proudly volunteering with Samaritan's Purse U.S Disaster Relief team since April, 2011

Insured by GLOCK
Reply With Quote
Old 03-05-2010, 12:38 AM
hornett22 hornett22 is offline
LawnSite Senior Member
Join Date: Jul 2006
Location: Glastonbury,CT
Posts: 396
I only use Scag hydro walk behinds.I have a 36",a 48" and a 61"

I used to like the Buntons until Textron ruined them.I switched to Scag and looking back,I should have started with them in the beginning.I like the pistol grips so all these new controls mean nothing to me.I hate the ECS on Exmark so that isn't an option.The Hustler set up looks like the only other control I could use but I prefer the pistol grips.

I also like the cast iron greasable spindles on the Scag.

I just sold a 1992 52" Scag walkbehind in January and I am already wishing I kept it.
Reply With Quote

bad cut , ferris hydrocut , missing areas , stragglers

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 07:42 PM.

Page generated in 0.06311 seconds with 9 queries