Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 10-11-2008, 09:36 AM
LyaecS175 LyaecS175 is offline
LawnSite Member
 
Join Date: May 2008
Location: RST
Posts: 23
Anyone know where the Bobcat strobe/beacon switch is mounted?

If you get the kit from the dealer, which slot on that front panel is it on? Is the wiring there already or do you have to run wires from the battery/fuse block to the switch then switch to beacon?

Also how do you get the little center switch panel off... there are two screws but there seem to be clips or something on the middle bar and I'd rather not break it.
Reply With Quote
  #2  
Old 10-11-2008, 09:53 AM
bobcat_ron's Avatar
bobcat_ron bobcat_ron is online now
LawnSite Fanatic
 
Join Date: Nov 2007
Location: Abbotsford, British Columbia
Posts: 9,926
Which model series have you got? The G series had everything pre-wired, just install the swich and run the wires under the cab head cushion.
A simpler thing to do is use a ciggy lighter kit, I still use mine.
__________________
“The only difference between a pigeon and a farmer today
is that a pigeon can still make a deposit on a John Deere.” - Harry De Jong



http://www.youtube.com/user/69rd96
Reply With Quote
  #3  
Old 10-11-2008, 10:58 AM
LyaecS175 LyaecS175 is offline
LawnSite Member
 
Join Date: May 2008
Location: RST
Posts: 23
Quote:
Originally Posted by bobcat_ron View Post
Which model series have you got? The G series had everything pre-wired, just install the swich and run the wires under the cab head cushion.
A simpler thing to do is use a ciggy lighter kit, I still use mine.
2008 S175 so should be the same as your old T190.

Ok, good to know that it's all prewired, thats what I'd hoped for. Do you know how to get that center panel between the L and R instrument panels off w/out breaking anything?

I would use the cig lighter, but the outlet in my unit is always live (rather than on with ignition) and I'd really like to not have to worry about switching it on/off every time. I already ordered the beacon switch anyway.
Reply With Quote
  #4  
Old 10-11-2008, 01:19 PM
bobcat_ron's Avatar
bobcat_ron bobcat_ron is online now
LawnSite Fanatic
 
Join Date: Nov 2007
Location: Abbotsford, British Columbia
Posts: 9,926
I don't think it's supposed to go there, I remember seeing an option for the panel where the A/C and fan controls are, that panel on the left side of your noggin, that's the easiest one to hook up to.
__________________
“The only difference between a pigeon and a farmer today
is that a pigeon can still make a deposit on a John Deere.” - Harry De Jong



http://www.youtube.com/user/69rd96
Reply With Quote
  #5  
Old 10-11-2008, 02:44 PM
LyaecS175 LyaecS175 is offline
LawnSite Member
 
Join Date: May 2008
Location: RST
Posts: 23
Ok I'll check that out, thanks again. The guys at the dealership said in the middle but I thought it looked easier on the side as well.
Reply With Quote
  #6  
Old 10-12-2008, 09:42 PM
LyaecS175 LyaecS175 is offline
LawnSite Member
 
Join Date: May 2008
Location: RST
Posts: 23
I just pulled the panel and there are only 2 harnesses there... one for the windshield wiper and one for the heater/fan. So if it's pre-wired it must be in the center panel between the hour meter and the start/stop panel.


Do you have any idea how to get it off? I pulled the two torx screws but it feels like there is something else holding it in... do I have to take the L and R panels off first then do the center or are there clips somewhere? Anyone know?
Reply With Quote
  #7  
Old 10-15-2008, 09:51 AM
LyaecS175 LyaecS175 is offline
LawnSite Member
 
Join Date: May 2008
Location: RST
Posts: 23
Ok, I figured it out. The harness is in that center panel, and the switch is meant to be in the 2nd from the right spot.

Now I have to find power/ground wires after they leave the harness... does anyone know where they come out to go up on top of the cab?
Reply With Quote
  #8  
Old 10-15-2008, 10:02 AM
bobcat_ron's Avatar
bobcat_ron bobcat_ron is online now
LawnSite Fanatic
 
Join Date: Nov 2007
Location: Abbotsford, British Columbia
Posts: 9,926
Quote:
Originally Posted by LyaecS175 View Post
Ok, I figured it out. The harness is in that center panel, and the switch is meant to be in the 2nd from the right spot.

Now I have to find power/ground wires after they leave the harness... does anyone know where they come out to go up on top of the cab?
Above the rear window, on the corner is a knock out of some type, either the left or right side, the radio antenna is also mounted there if it's installed.
__________________
“The only difference between a pigeon and a farmer today
is that a pigeon can still make a deposit on a John Deere.” - Harry De Jong



http://www.youtube.com/user/69rd96
Reply With Quote
  #9  
Old 10-15-2008, 10:24 AM
LyaecS175 LyaecS175 is offline
LawnSite Member
 
Join Date: May 2008
Location: RST
Posts: 23
I see the knockout on the left but there is no wire visible without pulling the headliner down... The wires from the switch go around the right side of the cab but my seatbelt is mounted in the hole on the right so I don't think a wire could go through there.
Reply With Quote
  #10  
Old 10-15-2008, 07:51 PM
bobcat_ron's Avatar
bobcat_ron bobcat_ron is online now
LawnSite Fanatic
 
Join Date: Nov 2007
Location: Abbotsford, British Columbia
Posts: 9,926
Quote:
Originally Posted by LyaecS175 View Post
I see the knockout on the left but there is no wire visible without pulling the headliner down... The wires from the switch go around the right side of the cab but my seatbelt is mounted in the hole on the right so I don't think a wire could go through there.
You might need to drill a 5/16" hole and use a rubber grommet inside to get the wires out.
__________________
“The only difference between a pigeon and a farmer today
is that a pigeon can still make a deposit on a John Deere.” - Harry De Jong



http://www.youtube.com/user/69rd96
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 10:05 PM.

Page generated in 0.09423 seconds with 7 queries