Register free!


Reply
 
Thread Tools   Display Modes
  #1  
Old 12-26-2008, 08:44 PM
tthomass's Avatar
tthomass tthomass is offline
LawnSite Gold Member
 
Join Date: Jun 2006
Location: N. VA
Posts: 3,442
Concrete/Masonry folks

I've got (5) steps coming out of a house. In the past, common practice has been to frame and pour it as one solid cube of concrete with a footer under it. I have seen another mason form it up after pouring the footer and then fill a lot of it with gravel to reduce the amount of concrete needed. I have also seen mason's using block in combination with gravel prior to concrete.

On one job I worked on we did the concrete block. Used them as our form and filled them solid with concrete. Next day filled with gravel and left if for 6" thick of concrete once poured to finish the steps. This was all later covered with stone.

What is your practice and why?
Reply With Quote
  #2  
Old 12-26-2008, 09:59 PM
MRBsx2 MRBsx2 is offline
LawnSite Member
 
Join Date: Jan 2007
Location: White hall, Maryland
Posts: 85
the way i do these is dig down to frost pour 10 inch or 12 inch footer then lay block out to the dimensions of the steps to work out with stone or if i am laying brick. this is how these steps are done
Attached Images
 
Reply With Quote
  #3  
Old 12-26-2008, 10:05 PM
denver 2 denver 2 is offline
LawnSite Member
 
Join Date: Dec 2008
Location: Cincinnati ohio
Posts: 35
The most critical factor to steps is the footer. On steps it would be advisable to tie in vertical rebar into the steps with the footer rebar. If useing block, then pin vertical rebar in first step and sides approx. every two feet, then grout block solid on first course and sides. You can fill the rest with gravel if you like then cap with whatever. If caping treads with stone or brick on top of block make certain that the brick or stone material have something to bond to other that just gravel. You can accomplish this by filling the top couse of each step with grout. Hope this helps.
Reply With Quote
  #4  
Old 01-07-2009, 01:06 AM
Bru75's Avatar
Bru75 Bru75 is offline
LawnSite Senior Member
 
Join Date: Jan 2009
Location: Virginia
Posts: 587
I built a set of steps last year similar to your description. I was required by code to put the footers on the same level as the house. From there I built the sides with cinder block, filled the inside with gravel, and formed the steps on top of it all. It was then covered with stone veneer on the sides and risers, with bullnose pavers for treads.
Just be sure to use a lot of rebar for the step slab.
I also installed heavy duty masonry ties attached to the existing foundation between every course of block.
I'll try to post picures when I have more time.
Hope this helps.
Reply With Quote
  #5  
Old 01-07-2009, 11:24 AM
Bru75's Avatar
Bru75 Bru75 is offline
LawnSite Senior Member
 
Join Date: Jan 2009
Location: Virginia
Posts: 587
Here are some pics.
Attached Images
       
Reply With Quote
  #6  
Old 01-07-2009, 11:31 AM
mrusk mrusk is offline
LawnSite Gold Member
 
Join Date: May 2003
Location: northern jersey
Posts: 3,247
Bru's way has to be the quickest on a large set of stairs. On a small set i would just use the pedestal method.
Reply With Quote
  #7  
Old 01-07-2009, 11:39 AM
Bru75's Avatar
Bru75 Bru75 is offline
LawnSite Senior Member
 
Join Date: Jan 2009
Location: Virginia
Posts: 587
Quote:
Originally Posted by mrusk View Post
Bru's way has to be the quickest on a large set of stairs. On a small set i would just use the pedestal method.
You are probably right. This particular set would have cost a fortune to pour solid (not to mention the extra weight), but a pedestal would have been a lot less work.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:23 AM.

Page generated in 0.09928 seconds with 8 queries