|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
03-06-2002, 02:03 PM
|
|||
|
|||
|
Hydraulic GPM
Hello,
Was wandering what the GPM is for the hydraulic pump on a 16G? |
|
#2
03-06-2002, 04:39 PM
|
|||
|
|||
|
Hydraulic GPM
It all depends on the type of hydraulic system. The Four Wheel Pro G had two types depending on when it was manufactured, one mechanical pump system & a electric motor pump system.
The Mechanical pump system produces about 3 gpm. The Electric motor system about 1/2 ~ 3/4 gpm. I hope this helps you in your quest. Dan
__________________
Mission: Constant Never-ending Improvement |
|
#3
03-06-2002, 04:55 PM
|
|||
|
|||
|
Gladiator
Thanks much,I have the mechanical system on a 88 16G.I think that the electric ones are on the newer tractors.
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
All times are GMT -4. The time now is 12:26 PM.
Forum Rules:
This Ariens/Gravely sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.
All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.
LawnSite.com is not affiliated with the Ariens/Gravely company. This forum is provided by LawnSite.com to Ariens/Gravely in order to better server their customers
Linear Mode
