Register free!

The Green Industry's Resource Center


 
 
Thread Tools   Display Modes
  #1  
Old 04-01-2009, 02:28 PM
browng browng is offline
LawnSite Member
 
Join Date: Jun 2008
Location: Maylene, AL
Posts: 72
Super Duty 48" for a Trimstar 48"

I was told today that a walk behind will handle a hill much better than a ZTR so I wanted to get your valuable opinions given I have never used a walk behind. I have a hill that runs across my back yard that has approximately a 23 degree grade, I purchased a Super Duty 48" last June and just haven't been able to get it to cooperate on this hill, I end up leaving skid marks on my way down. I was looking to sell my Super Duty for around $5,900 and thinking I could turn around and buy a Trimstar 48". Is this a better route to take than going to a tractor style mower? To be honest with you I am not real excited about going to a tractor style.
  #2  
Old 04-01-2009, 04:55 PM
djagusch djagusch is online now
LawnSite Gold Member
 
Join Date: Mar 2006
Location: MN
Posts: 3,725
Post a pic of the hill. Also how big of a area is the hill and how big is the rest of the yard. Are you mowing the hill side ways? Angled? Up and down? The ZTR in my opinion holds a hill better than a tractor. The Trimstar will beat the ZTR though. Seeing the whole situation will help us pick out what is the best machine for the job.
  #3  
Old 04-01-2009, 11:02 PM
browng browng is offline
LawnSite Member
 
Join Date: Jun 2008
Location: Maylene, AL
Posts: 72
Take a look at the attached pics and let me know if you think the Trimstar will handle the hill better than my Super Duty. I have never used a walk behind so I have no idea how they respond. My lot is 1/2 acre, after taking out the space for my house and the drive ways I probably don't mow more than 12,000 sq. feet and the hill is about 6,000 sq. feet. With my ZTR I have been mowing it up and down, it is impossible to do it side ways as the front end doesn't hold and heads down hill. You will notice in the pics that the grass is not great on the hill, my goal is to turn it into a nice grassy hill and that is why I want to be able to mow it.
Attached Images
   
  #4  
Old 04-02-2009, 11:04 AM
djagusch djagusch is online now
LawnSite Gold Member
 
Join Date: Mar 2006
Location: MN
Posts: 3,725
I would think your mower would be able to handle that hill. Take it at a angle and I'm guessing it will go up it easily. Mowing it sideways should be possible also. Go slow and the bottom wheel lever should be pushed more than the top lever (think of the top wheel slightly dragging compared to the bottom wheel that is pushing up). Once the grass gets established you'll be able to mow faster also.

The Trimstar would have no problems with that hill. Also with your lot size it probably fits the yard better.

Either mower would work but if you can't figure the ZTR go with the W/B.

Also I noticed scalping on the top of the hills crest. Use your foot and lift the deck up when you go over that part to reduce scalping.
  #5  
Old 04-02-2009, 12:41 PM
browng browng is offline
LawnSite Member
 
Join Date: Jun 2008
Location: Maylene, AL
Posts: 72
I am able to go up it fine, the problem is when I have to go down it the mower sometimes looses traction and begins to skid (you can see some of the marks on the hill). I have worked with the Super Duty for almost a year now and haven't been able to get it to cooperate fully so I think I will give the Trimstar a try if you say it will perform better than the ZTR. I appreciate you taking time to provide valuable insight. Thanks!
  #6  
Old 04-02-2009, 09:08 PM
djagusch djagusch is online now
LawnSite Gold Member
 
Join Date: Mar 2006
Location: MN
Posts: 3,725
At first the Trimstar (or any walkbehind) will take some time to get use to. Play with it in a parking lot or driveway. After you get the hang of it your yard will be done as quickly as the ZTR took.
  #7  
Old 04-03-2009, 11:03 AM
browng browng is offline
LawnSite Member
 
Join Date: Jun 2008
Location: Maylene, AL
Posts: 72
OK, thanks! Is there going to be any advantage of one Trimstar over the other (36" vs 48")? I'm not as concerned about the money as I am about getting the right machine.
  #8  
Old 04-03-2009, 04:04 PM
djagusch djagusch is online now
LawnSite Gold Member
 
Join Date: Mar 2006
Location: MN
Posts: 3,725
With what I see a 48" will do fine.
  #9  
Old 04-05-2009, 10:05 PM
browng browng is offline
LawnSite Member
 
Join Date: Jun 2008
Location: Maylene, AL
Posts: 72
I read in an old post the new Trimstar will be available in 36"/15hp, 48"/17hp, 54"/19hp or 54"/23hp with electric start. Why is the electric start only available on the 54"/23hp? Is the 17hp going to have ample power for the dual hydros and be able pull a good hill? I would hate to lug it down. I don't really want a 54" deck but I'm considering it given the additional hp and electric start. Any chance of getting a 48" with 23hp and electric start?
  #10  
Old 04-06-2009, 09:44 AM
mowerconsultant's Avatar
mowerconsultant mowerconsultant is offline
LawnSite Fanatic
 
Join Date: Feb 2000
Location: Syracuse, NY
Posts: 9,755
Quote:
Originally Posted by browng View Post
I read in an old post the new Trimstar will be available in 36"/15hp, 48"/17hp, 54"/19hp or 54"/23hp with electric start. Why is the electric start only available on the 54"/23hp? Is the 17hp going to have ample power for the dual hydros and be able pull a good hill? I would hate to lug it down. I don't really want a 54" deck but I'm considering it given the additional hp and electric start. Any chance of getting a 48" with 23hp and electric start?
The electric start is only available on the 54" due to cost, it gets expensive adding it to smaller deck and hp units.
The 48" will be fine in your application, you have to remember your at a much lower weight with a walk behind.
No chance of a 23/48 electric start, sorry.

Pj
__________________
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 08:41 PM.

Page generated in 0.11488 seconds with 9 queries