Register free!


Reply
 
Thread Tools   Display Modes
  #11  
Old 04-06-2009, 09:28 PM
irrig8r irrig8r is offline
LawnSite Platinum Member
 
Join Date: Dec 2004
Location: Silicon Valley, CA
Posts: 4,545
I was gonna tell you:

Next time you know you're going to be dealing with a Nightscaping Powercenter, and want to look at the instructions before hand, they're easy to come by.

(I have the more common control module options printed and laminated and in a binder.)

But you know what? When the page was redesigned there were a lot of screw-ups.

Clicking on some of the photos or hypertext links takes you to other product's pages.

Sometimes clicking just takes you to a wiring diagram, but not the instructions.

Seems to me Nightscaping is currently operating without a webmaster... low priority maybe.

Anyway, maybe you'll find something useful if you look around enough.

http://www.nightscaping.com/instructions/
__________________
Landscaper. Irrigator. Illuminator. Music lover. Coffee drinker.
Reply With Quote
  #12  
Old 12-16-2012, 12:10 PM
Randy1972 Randy1972 is offline
LawnSite Member
 
Join Date: Dec 2012
Location: duluth, ga
Posts: 1
Need help with Nightscaping power center timer!

Hi-I have the above unit for path lighting, and a T-10-02SSA: Analog Time Switch. However, there are no instructions for how to set on/off/duration for this puppy! When I spin the outer wheel, the inner wheel and 'clock' also spin! I see the last post was like 2009, but maybe someone will see who knows how to set this timer to work as I'd like it???? Thanks in advance.
Reply With Quote
  #13  
Old 12-17-2012, 01:03 PM
INTEGRA Bespoke Lighting's Avatar
INTEGRA Bespoke Lighting INTEGRA Bespoke Lighting is offline
LawnSite Platinum Member
 
Join Date: Jun 2007
Location: Muskoka, Ontario, Canada
Posts: 4,009
http://www.nightscaping.com/timers/ Contact Nightscaping directly for tech support. I have never used an analog timer so cannot direct you.
__________________
James Solecki
INTEGRA ~ Bespoke Lighting Systems ®
JSLDesign Inc.


www.integralighting.com

www.facebook.com/INTEGRA.Lighting

Affiliations: IESNA, IALD, IDA, AOLP, LO, MBA
Reply With Quote
  #14  
Old 12-17-2012, 04:18 PM
irrig8r irrig8r is offline
LawnSite Platinum Member
 
Join Date: Dec 2004
Location: Silicon Valley, CA
Posts: 4,545
That link I posted in 2009 doesn't work anymore.

And this one takes you to the timer, but no instructions.

http://www.nightscaping.com/timers/

I haven't installed a NIghtscaping Powercenter for a few years now.

For me, it's either Vista or FXL.
__________________
Landscaper. Irrigator. Illuminator. Music lover. Coffee drinker.
Reply With Quote
  #15  
Old 12-18-2012, 02:18 PM
LLC RI's Avatar
LLC RI LLC RI is offline
LawnSite Member
 
Join Date: Mar 2011
Location: Cranston, RI
Posts: 148
From what I remember of those timers, they had two metal tripper pins that slid into the timing wheel at the time you wanted them on and off. If you are not hearing/feeling the timer wheel click on and off as you rotate it, it's likely that there are no pins in your wheel.... call nightscaping 1-800-544-4840 and ask to order/get replacement set of pins...
Reply With Quote
  #16  
Old 12-20-2012, 12:30 AM
AOLP AOLP is offline
Sponsor
 
Join Date: Sep 2010
Location: Harrisburg PA
Posts: 158
Quote:
Originally Posted by JimLewis View Post
Yah, that's what it was. There are like 144 little switches and if you want to have it on from 7-11, for instance, then ALL of the switches during that timeframe need to be pushed out. I finally figured it out about an hour after making this post. It's just azz-backwards from every other timer out there. But to be honest, after I figured out how the dang thing worked, I kinda like it better than regular timers.
Jim, Nightscaping offers an exceptional product. It's the AOLP's desire that they would join the organization as they have much to contribute. knowing the products available in our industry is valuable to all of us. appreciate your input here and hope to see you in atlanta in feb. if you can make it
__________________
www.aolponline.org
Reply With Quote
  #17  
Old 12-21-2012, 10:34 PM
irrig8r irrig8r is offline
LawnSite Platinum Member
 
Join Date: Dec 2004
Location: Silicon Valley, CA
Posts: 4,545
Nightscaping transformers exceptional? They have been long lived in my experience, but a few annoying features with long overdue upgrades had not been corrected last I checked. Safe? Certainly! Reliable? Mostly. Easy to configure? No. Easy access? No. Wide distribution? No.
Posted via Mobile Device
Reply With Quote
  #18  
Old 12-22-2012, 10:29 AM
INTEGRA Bespoke Lighting's Avatar
INTEGRA Bespoke Lighting INTEGRA Bespoke Lighting is offline
LawnSite Platinum Member
 
Join Date: Jun 2007
Location: Muskoka, Ontario, Canada
Posts: 4,009
Quote:
Originally Posted by irrig8r View Post
Nightscaping transformers exceptional? They have been long lived in my experience, but a few annoying features with long overdue upgrades had not been corrected last I checked. Safe? Certainly! Reliable? Mostly. Easy to configure? No. Easy access? No. Wide distribution? No.
Posted via Mobile Device
Here is my assessment of the venerable Nightscaping PowerCenter Line of transformers:

They certainly have been around for long enough to work any bugs out! :-) and they are long overdue for some modernization. But they work, hardly ever fail, and have some features that no other transformers offer.

The case is probably the most in need of some updates. The silly slide up and remove door system, with is sharp edges and easily bent mounting tabs is their weakest 'feature'. Back in the day, many of us were on Bill to update the door to a hinged unit with a clasp, but this would require an expensive re-listing of the entire transformer.

Inside is where the magic happens. They are a dream to install and wire up for the busy contractor, what with ample room for extra wire and any necessary in-line accessories. I think they have more interior cabinet space than any other transformer on the market. And if this is not factually accurate, then it is the unique, large, dual sided terminal lugs that make the difference. Biggest lugs I have seen and you dont have to contort yourself in order to get under the transformer to ensure that your wires are all into the proper spots.

They also have a unique Low/Medium/High power switch, that when combined with their H2O (multi tap) transformers give you un-matched micro control of voltage outputs.

The Modular control bay is another fantastic feature. I don't understand why more manufactures have not borrowed from this. The contractor can easily install or replace / upgrade the controls on board in the field. The options are many what with stand-alone and combinations that include photo cell, analog timer, digital timer, relay module, sprinkler control module, x10 module. With a bit of upgrading Im sure they could produce a UPB module too. ( I make my own using the modular control bay blank plate.) This feature alone is worth the price of admission.

Another great feature is the on-board control over-ride switch. This simple toggle allows you to by-pass any installed control device and send power out to the system. Fantastic for service calls. Another unique feature as far as I know. Great for those times when a control has failed or programming is messed up and you want your client to have the lights on immediately.

For a long time I was a fan of the S-series fustats that these transformers used for secondary output safety. But that was back in the incandescent days. The fustat is still a great diagnostic tool, but in all honesty, there is something to be said for magnetic breakers, especially when your customers are located far and wide and there is not a supply of Buss S-25 Fustats nearby.

I think the NS Powercenter is still a great transformer, but it is probably due for an update. A switch to a torroid core, a door with hinges and a clasp, a UPB control module, a new smaller size (150 Watt) would be welcome.
__________________
James Solecki
INTEGRA ~ Bespoke Lighting Systems ®
JSLDesign Inc.


www.integralighting.com

www.facebook.com/INTEGRA.Lighting

Affiliations: IESNA, IALD, IDA, AOLP, LO, MBA
Reply With Quote
  #19  
Old 12-22-2012, 11:28 AM
irrig8r irrig8r is offline
LawnSite Platinum Member
 
Join Date: Dec 2004
Location: Silicon Valley, CA
Posts: 4,545
As I recall, they never stopped making a 150 W Powercenter. The module bay was a great innovation, but frankly I prefer the plug-in set up that I think FX was the first to use. The lugs on the FX are plenty big, especially considering there's a limit of 25 A per circuit. As I recall, they were also the first to offer multi-tap transformers.

This year FX switched from an ETL listing to UL, which might mean they also meet the Canadian standards? They redesigned the way the cord enters the box and added a new closed in 120V compartment.
__________________
Landscaper. Irrigator. Illuminator. Music lover. Coffee drinker.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 05:13 AM.

Page generated in 0.06671 seconds with 7 queries