Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #461  
Old 08-03-2013, 04:15 PM
Junior M's Avatar
Junior M Junior M is offline
LawnSite Fanatic
 
Join Date: Jun 2008
Location: South Carolina
Posts: 13,127
Makes me wish I was a farmer..
Reply With Quote
  #462  
Old 08-03-2013, 04:41 PM
farmerknowsbest farmerknowsbest is offline
LawnSite Senior Member
 
Join Date: Apr 2009
Location: Eastern Ontario
Posts: 350
Oh hi there,

The last couple weeks I've been busy applying fungicide to our corn fields.

Installed the rear boom kit to keep the sprayer clean and dry and to prevent the product from being wiped off while passing under the sprayer.



First field is tasseling so it is go time


First field the corn was about 8-9ft tall. The pipeline in front of the cab is 10ft off the ground




Very pleased with how little damage to the crop there is with this new sprayer








Very easy to stay on the row with a rear camera


Some corn was VERY tall




Without the rear boom option all that pollen would be wet and turning to cement.




You need at least one droplet per square inch of leaf area. With ground application that is very easy to accomplish.






You need a high rate of water so the 1400gal tank only goes 80 acres as opposed to 140acres with roundup




It's funny, 8 years ago you used to spray one strip, but now we spray the entire field and leave one strip.


Every morning meant a crop tour looking for the next field of tassels.


Our corn crop is decent but variable. Where it is good yields will be record, but where it is bad it is REALLY bad.






RTK sub inch accurate GPS autopilot makes the job a breeeze


A rare problem for our area in corn. Pulled into this field and after the first round the sprayer was crawling with grass hoppers!


While we have had excellent results with fungicide in corn, we can't seem to get reliable economic payback results in beans


Still we're doing several trials this year again


This job is quickly becoming a favourite of mine. Makes for some great photos.


Questions or comments welcome.

Warren
__________________
http://www.cedarlodgefarms.com

Reply With Quote
  #463  
Old 08-03-2013, 05:31 PM
agrostis agrostis is offline
LawnSite Bronze Member
 
Join Date: Nov 2009
Location: Winston-Salem NC
Posts: 1,691
That is a impressive set-up. How wide is that sprayer?
Reply With Quote
  #464  
Old 08-03-2013, 05:44 PM
farmerknowsbest farmerknowsbest is offline
LawnSite Senior Member
 
Join Date: Apr 2009
Location: Eastern Ontario
Posts: 350
Quote:
Originally Posted by agrostis View Post
That is a impressive set-up. How wide is that sprayer?
10 section 120ft boom on 15" nozzle spacing. 1400gal tank and 4 wheel steer.

Warren
__________________
http://www.cedarlodgefarms.com

Reply With Quote
  #465  
Old 08-03-2013, 06:51 PM
agrostis agrostis is offline
LawnSite Bronze Member
 
Join Date: Nov 2009
Location: Winston-Salem NC
Posts: 1,691
That's 96 nozzle's if i did that math right. Do you have something in that machine that keep's up with individual nozzle's? I about break my neck watching 20 nozzle's for trash on my little 300 Gal. sprayer.
Reply With Quote
  #466  
Old 08-03-2013, 07:12 PM
farmerknowsbest farmerknowsbest is offline
LawnSite Senior Member
 
Join Date: Apr 2009
Location: Eastern Ontario
Posts: 350
Quote:
Originally Posted by agrostis View Post
That's 96 nozzle's if i did that math right. Do you have something in that machine that keep's up with individual nozzle's? I about break my neck watching 20 nozzle's for trash on my little 300 Gal. sprayer.
98 actually. There is a nozzle behind each rear wheel as well to make up for driving through the application.

That's the nice thing about the front boom. All the nozzles are in front of you!

Warren
__________________
http://www.cedarlodgefarms.com

Reply With Quote
  #467  
Old 08-03-2013, 08:51 PM
hvy 1ton's Avatar
hvy 1ton hvy 1ton is offline
LawnSite Senior Member
 
Join Date: May 2009
Location: Lawrence KS
Posts: 556
I thought you bought an 8010 at some point, but i must be thinking of some one else. Worked with 7088's and one 8120 last year and really like the 8010 based machines. This year it's 2 7230's and a 8230 with 2 40' drapers and a 35'. Boss must have thought i made the whole grain cart deal look too easy last year, no 2 combines fill up at the same speed now.
__________________
Life summed up by refrigerator magnets:
HE WHO DIES WITH THE MOST TOYS WINS
OLD RANCHERS NEVER DIE,
THEY JUST QUIT HORSIN AROUND
Reply With Quote
  #468  
Old 08-04-2013, 01:15 AM
farmerknowsbest farmerknowsbest is offline
LawnSite Senior Member
 
Join Date: Apr 2009
Location: Eastern Ontario
Posts: 350
Quote:
Originally Posted by hvy 1ton View Post
I thought you bought an 8010 at some point, but i must be thinking of some one else. Worked with 7088's and one 8120 last year and really like the 8010 based machines. This year it's 2 7230's and a 8230 with 2 40' drapers and a 35'. Boss must have thought i made the whole grain cart deal look too easy last year, no 2 combines fill up at the same speed now.
Nope, still rocking the 4000 hour 2388 with all the updates.

Well if you can handle a cart with that lot of combines you are a decent operator in my books.

Warren
__________________
http://www.cedarlodgefarms.com

Reply With Quote
  #469  
Old 08-18-2013, 04:46 PM
farmerknowsbest farmerknowsbest is offline
LawnSite Senior Member
 
Join Date: Apr 2009
Location: Eastern Ontario
Posts: 350
Hi there,

After a weeks vacation touring Ohio, Indianna, Illinois, Iowa and Michigan it's back to work. Pushing hard to get this disaster of a barn yard cleaned up and the fence rows knocked out so we can get this land tiled and up and running for spring.

Waiting for the demo permit and then we're off to the races


Bye bye little shed




Getting there. Unbelievable how much crap these people had scattered everywhere in a couple acres. I do not envy you southern guys that do storm cleanup jobs!


Found a variety of old farm equipment. $$$


Planning on severing an couple acres just behind the garage and in line with the long driveway.






2 minutes of work and we had a mess.


Hour later it was cleaned up nicely






Third trailer of garbage ready to go to the dump!


Between the farm equipment and all the tin that was everywhere we are easily going to get a full dumpster of scrap


Started on the fencelines. Loaded the trees on the truck and hauled them away from the house to be burnt.


Getting warm


A few more steps back


We have a high school kid working for us this summer and she had never been around a fire like this. She was absolutely fascinated by the heat off it.


Nice clean burn


Had to rake 2 acres of weeds. Every pass with the root rake would find another roll of wire. Or a bath tub, or old carpet. Wood shingles. And the list goes on and on


Burnt really well


When we shut down for the night.


Getting a 35 tonne machine in the help with the fence rows and a small bush to get it knocked out quickly. Gonna have the big machine go at the trees and we'll follow with the truck and skeleton bucket dealing with the 100 or so loads of stone in the fencerows. Hopefully it dries up because this farm desperately needs tile. Scouted out a haul road in the weeds and until we get some sun there won't be a pretty way of getting to the back of the farm.

Warren
__________________
http://www.cedarlodgefarms.com

Reply With Quote
  #470  
Old 08-18-2013, 10:52 PM
KTM KTM is offline
LawnSite Senior Member
 
Join Date: Dec 2007
Location: Wisconsin
Posts: 474
Unbelivable how some people can live like that.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:46 PM.

Page generated in 0.08423 seconds with 8 queries