New Trimstar 54"

[mowerconsultant]

Originally Posted by SMALLTIME22

What is the MSRP on the 48 and 54? I think the 2009 MSRP list showed the 36 and 48. Might want to trade in my 08 at the end of this season or the next

Here are the new models and the MSRP pricing.

TrimStar Hydro, 15HP Kaw KAI / 36" 929232 $5,399
TrimStar Hydro, 17HP Kaw KAI / 48" 929240 $5,899
TrimStar Hydro, 19HP Kaw KAI / 54" 929265 $6,399
TrimStar Hydro, 23HP Kaw / 54" E.S. 929273 $7,399

[premierlawnlakeland]

Do the new trimstars come with the abjustable deck, I am also looking at one of these as well, and cannot wait to demo one!

[SMALLTIME22]

I assume that it will be a while before a demo can be arranged? From talking to the dealer it seemed he had one of the first available for sale.

[mowerconsultant]

Originally Posted by premierlawnlakeland

Do the new trimstars come with the abjustable deck, I am also looking at one of these as well, and cannot wait to demo one!

The new TrimStar's come with the deck lift system, yes.
Get yourself a demo from Clint, there are a couple demo units rolling around in Florida.

Pj

[mowerconsultant]

Originally Posted by SMALLTIME22

I assume that it will be a while before a demo can be arranged? From talking to the dealer it seemed he had one of the first available for sale.

You have a regional distribution center / warehouse about 20 minutes south of Ohio, there is a very good chance you can get a demo sooner than later.
E-mail me and I can forward your request to them to demo it through your dealer.

Pj

[FCS Services]

I would like to demo one too - I'm in NW kansas.. Close to Easern Colorado and SW Nebraska. Looking at a 36" WB. How does this unit handle hills?? I have 1 property that has some hills that my Super Z can't do - I have a conventional rider that can get some of them (by using lots of body english). but there is one hill that we have to push. how would this 36" do on that ???

Thanks
Frank

[premierlawnlakeland]

I got a quick question, do they make some type of sheild for the miniz that guards the wire on the clutch for the blade engagement, I have had some many times where this wire has came loose and I am now going on my third pig tail. Any suggestions????

[mowerconsultant]

Originally Posted by FCS Services

I would like to demo one too - I'm in NW kansas.. Close to Easern Colorado and SW Nebraska. Looking at a 36" WB. How does this unit handle hills?? I have 1 property that has some hills that my Super Z can't do - I have a conventional rider that can get some of them (by using lots of body english). but there is one hill that we have to push. how would this 36" do on that ???

Thanks
Frank

It would work excellent on your slopes, this unit is glued to hillsides.

Pj

[mowerconsultant]

Originally Posted by premierlawnlakeland

I got a quick question, do they make some type of sheild for the miniz that guards the wire on the clutch for the blade engagement, I have had some many times where this wire has came loose and I am now going on my third pig tail. Any suggestions????

There isnt a shield for the Mini Z.
Get with Clint and he will help you make sure our routing the new pigtail correctly so this doesn't happen in the future.

Pj