Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 06-30-2009, 11:35 PM
trailboss's Avatar
trailboss trailboss is offline
LawnSite Member
 
Join Date: Jan 2001
Location: Cowtown - Fort Worth, TX.
Posts: 162
Well Light

Over the past couple of years I havent used very many well lights due to the problems that I have had in the past with water and fire ants. I am finding myself wanting to use some here and there in my designs but was curious what everybody else was currently using?? Do you like the Par 36 or the MR16 or 11? Which fixture do you find has the best adjustment and durability? I would really like something fairly deep so as not to be looking at the source but I still like a wide beam spread in most cases.
Any input and/or suggestions would be greatly appreciated.
Thanks, Steve
Reply With Quote
  #2  
Old 06-30-2009, 11:50 PM
David Gretzmier David Gretzmier is offline
LawnSite Gold Member
 
Join Date: Mar 2001
Location: Fayetteville,AR
Posts: 3,648
I have not installed a par in long time. too many expensive bulbs replaced under warranty was damaging my reputation and pocketbook. Leaves, insects, etc add to the misery. I use wall washers when you really need the floody beams, but mostly 60 degree mr-16's. mr-11's are limited to 30 degrees of flood, and tend to not last as long as mr-16's as a rule. But I do use them on gutter mounts pretty regular.
__________________
freedom
Reply With Quote
  #3  
Old 07-01-2009, 12:02 AM
emby's Avatar
emby emby is offline
LawnSite Senior Member
 
Join Date: Jun 2008
Location: St.George, Ontario Canada
Posts: 369
My experience with well lights so far have been pretty good. I tend to only install in the turf with lots of gravel and piece of pvc about a foot long leading out of the hole for drainage.
Have not used the PAR lamps as I have only used MR 16's. Lots of degrees to play with and wattages.
I am currently working on installing 4 of these into stamped concrete. Conduit is running under the ABS and lots of gravel. The hard part for this application is finding a sono tube that is the same diameter as the ABS. Might have to modify something to create the form for the concrete.
Anyways that's my 2 cents.

Ken
Reply With Quote
  #4  
Old 07-01-2009, 12:32 AM
S&MLL S&MLL is offline
LawnSite Senior Member
 
Join Date: Feb 2008
Location: Somerset County NJ
Posts: 749
CopperMoons cm360 fits real nice in a 6" sonotube
Reply With Quote
  #5  
Old 07-01-2009, 12:39 AM
emby's Avatar
emby emby is offline
LawnSite Senior Member
 
Join Date: Jun 2008
Location: St.George, Ontario Canada
Posts: 369
Thats too funny. That is what I am installing but we measured the brass grate and it was only 5 and three quarters. I was worried that the grate will not cover the hole left by the sono tube. Thanks for the tip I will try it out.

Ken
Reply With Quote
  #6  
Old 07-01-2009, 01:23 AM
Lite4's Avatar
Lite4 Lite4 is online now
LawnSite Silver Member
 
Join Date: May 2007
Location: Indianapolis, IN
Posts: 2,870
Quote:
Originally Posted by David Gretzmier View Post
I have not installed a par in long time. too many expensive bulbs replaced under warranty was damaging my reputation and pocketbook. Leaves, insects, etc add to the misery. I use wall washers when you really need the floody beams, but mostly 60 degree mr-16's. mr-11's are limited to 30 degrees of flood, and tend to not last as long as mr-16's as a rule. But I do use them on gutter mounts pretty regular.
Man Dave, I dont' know what kind of pars you have been using but I am getting well over a year on all of mine without any problems at all. I use all GE lamps exclusively on all pars, t-3s, MR16s and 11s. The old tractor light is my preference for washing architecture as I have done the side by sides and it gives a wider, smoother spread than the MRs, especially when you add a lense to it also. Just my preference, I won't knock anybody who uses an MR exclusively though. It is a personal preference and for the way I design the par just works better for me in some instances than the MRs do.
__________________


Tim Ryan
Lite4 Outdoor Lighting
www.lite-4.com
Reply With Quote
  #7  
Old 07-01-2009, 11:48 AM
Mark B's Avatar
Mark B Mark B is offline
LawnSite Senior Member
 
Join Date: Jan 2003
Location: Burlington/Buxton N.C
Posts: 980
I mainly well lights with PARS. I have had bulbs last 2-3 yrs. I do run into every once and a while with the screw on the bulb that will be loose just a little bit. I think the contraction and expansion cause that.
__________________
Click the like button...
www.facebook.com/wuzworthit



Reply With Quote
  #8  
Old 07-01-2009, 02:32 PM
JoeyD's Avatar
JoeyD JoeyD is offline
LawnSite Silver Member
 
Join Date: Aug 2007
Location: Escondido, CA
Posts: 2,965
Pars tend to last longer then MR's in my experience......

http://www.uniquelighting.com/produc...ell_lights.htm









Reply With Quote
  #9  
Old 07-01-2009, 02:33 PM
JoeyD's Avatar
JoeyD JoeyD is offline
LawnSite Silver Member
 
Join Date: Aug 2007
Location: Escondido, CA
Posts: 2,965
Heres the new ROOT Well Light....Lets see the knockoffs copy this!!!

Reply With Quote
  #10  
Old 07-01-2009, 04:10 PM
Lite4's Avatar
Lite4 Lite4 is online now
LawnSite Silver Member
 
Join Date: May 2007
Location: Indianapolis, IN
Posts: 2,870
Whoa!!! That is some aggresive turf grass.
__________________


Tim Ryan
Lite4 Outdoor Lighting
www.lite-4.com
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:41 PM.

Page generated in 0.09882 seconds with 7 queries