![]() |
|
|||||||
| Hustler Turf Equip Lawn Mowers & Turf Care Equipment |
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
super-z hydraulic leak
my 2002 super Z has a large leak from the passenger side of the mower. is there a gasket that might have blown out and if so now much is it?
|
|
#2
|
||||
|
||||
|
We need to narrow down exactly what is leaking here first.
Is it a line or fitting? or is it leaking from a seal on the pump or wheel motor? Pj
__________________
|
|
#3
|
||||
|
||||
|
its coming out of the brake drum.
|
|
#4
|
||||
|
||||
|
Ok.
It could be as simple as a seal or as bad as needing a wheel motor. It needs to be disassembled to find out. Pj
__________________
|
|
#5
|
||||
|
||||
|
ok thanks.
|
|
#6
|
|||
|
|||
|
There is normally no pressure on the dust seal that would allow oil to leak out there. Therefore, if it is leaking there, a seal internal in the wheel motor is leaking. I have seen this a number of times before. There is a seal inside that looks as though it is made of Teflon that goes out, allowing fluid to flow out of the dust seal. Your dealer can get a seal kit for the motor. They are pretty simple to repair. Just keep it CLEAN.
|
|
#7
|
||||
|
||||
|
thanks
well, its all put together all new seals and bearings. and while at the dealer i got some flex forks they are nice. thanks for the help,
devin p.s. i don't know what you can do but, turneys power place in chesterland, oh needs some help. everyone (the manager, his wife and son) quit and they don't have the cd loaded to even look up parts. |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
All times are GMT -4. The time now is 11:06 PM.
Forum Rules:
This hustlerturfequipment.com sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.
All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.
LawnSite.com is not affiliated with the Excel Hustler company. This forum is provided by LawnSite.com to Excel Hustler in order to better server their customers