The Green Industry's Resource Center

360ci · #21 12-05-2009, 09:05 PM

Wow. I didn't know you could buy it in a brush on can! Neat.

SKYNYRD - what brand/model is that twin blade mower of yours?

SKYNYRD · #22 12-05-2009, 09:13 PM

Quote:

Originally Posted by 360ci

Wow. I didn't know you could buy it in a brush on can! Neat.

SKYNYRD - what brand/model is that twin blade mower of yours?

that's a 2009 Better Outdoor Products Quick 32 Samurai...

http://www.betteroutdoorproducts.com...tem=16KE-32-08

and fluid film is available in...

Greg78 · #23 12-05-2009, 09:23 PM

Quote:

Originally Posted by SKYNYRD

preppin n sprayin down the underneath of the mower deck

Do you us FF on the quick all the time and since new? Sure is a lot of rust on the deck if you do...... Mine is about the same age as yours and I have never used nothing on the deck and it has no rust....

Not knocking FF or anything just curious as FF didn't do much for my deck.

SKYNYRD · #24 12-05-2009, 09:33 PM

Quote:

Originally Posted by GregByrd

Do you us FF on the quick all the time and since new? Sure is a lot of rust on the deck if you do...... Mine is about the same age as yours and I have never used nothing on the deck and it has no rust....

Not knocking FF or anything just curious as FF didn't do much for my deck.

i use it all the time and since new. where i live everything rusts because of the amount of humidity that's always in the air, the constant dampness and crap like that. i don't have a current picture but there hasn't been a spec of rust on the deck since i installed the mulch plate. the only time there was rust was when i was using the discharge chute. the paint didn't even make it threw the first 5 hours of operation. it came off in sheets! no primer or anything underneath, just bare metal. the machine sits outside so add the dampness and it's no wonder it rusted. i've yet to figure out how many hours an application lasts but on average i coated it after doing all 7 lawns we take care of 1 time. however, it has gone at least 2 cuts on all 7 without being coated and you can still feel traces of the previous application.