search sponsored by:
Advanced Search

The Green Industry's Resource Center

Old 08-26-2009, 09:18 PM
SlowMow SlowMow is offline
LawnSite Member
Join Date: Jun 2007
Location: Fort Hood, TX
Posts: 57
Reel mowing

Okay, so I have a bit of a crazy question. Has anybody or does anybody use a reel mower and cut smaller residential lawns weekly? Just curious, because I use one for my own yard at home, but you have to stay on top of it and not let it get carried away.
Posted via Mobile Device
Reply With Quote
Old 08-26-2009, 11:54 PM
mowerknower mowerknower is offline
LawnSite Senior Member
Join Date: Aug 2008
Location: obamanation
Posts: 766
I have a lot of lcos that mow with reels. If the customer wants it done with a reel, just charge them more and make sure you check for rocks.
Reply With Quote
Old 08-27-2009, 12:58 AM
STIHL GUY's Avatar
LawnSite Fanatic
Join Date: May 2008
Location: CT
Posts: 5,220
i picked one up on the side of the road but it was old and hard to push. no fun so i got rid of it
Reply With Quote
Old 08-27-2009, 12:58 AM
STIHL GUY's Avatar
LawnSite Fanatic
Join Date: May 2008
Location: CT
Posts: 5,220
i have never had a customer ask for that type of service nor seen a reel mower being used around ee except the golf course
Reply With Quote
Old 08-27-2009, 01:01 AM
Az Gardener Az Gardener is offline
LawnSite Gold Member
Join Date: Sep 2005
Location: Phoenix, Az
Posts: 3,899
See picture of one of my guys below. I guess it is tiny in the pic but it is a 27" reel

“If I accept you as you are, I will make you worse; however, if I treat you as though you are what you are capable of becoming, I help you become that.”
Reply With Quote
Old 08-27-2009, 07:35 AM
cgaengineer's Avatar
cgaengineer cgaengineer is offline
LawnSite Fanatic
Join Date: May 2007
Location: Winder, GA
Posts: 15,782
They are very common around here for higher end subdivisions and commercial properties.
Georgia Applicator License Number 09102

"A well-regulated militia being necessary to the security of a free state, the right of the people to keep and bear arms shall not be infringed."
Reply With Quote
Old 08-27-2009, 10:28 AM
txgrassguy's Avatar
txgrassguy txgrassguy is offline
LawnSite Gold Member
Join Date: Jan 2007
Location: south enough that spanish is necessary
Posts: 3,091
Did for years until I purchased a dedicated bagging machine - in my case an Exmark Navigator.
I have used, with great success, the Hyiater Harriet 21" walk behind rotary mowers with the drum drive when mowing par 3 tees on a public golf course I maintained. Handily cut at 1/2", bagged the debris and best of all I didn't have to repair reels damaged from golf tees.
I have also successfully used this same mower for residential mowing and it has ended up being a complete success.
Handles undulations well, mows at the 1/2" setting quite well, collects clippings and small twigs and the best feature is the finished cut is indistinguishable from a reel mower.
Less costly overall by far than a reel in terms of initial equipment price, ease of sharpening, bags essentially everything, is durable - so no more worries about the reel height of cut getting whacked out of adjustment or the reel to bed knife setting causing either poor mowing or rifling of the reel and bed knife.
So- to answer your question - I used too with everything from a Toro Series 5 floating head greens mower to a Jacobsen PGM 26" commercial walk behind reel mower, to a National 84" reel mower and I still have a Toro 216-G 7' wide utility tri-plex.
Bear in mind I have over 20 years experience maintaining reel mowers, I have in my shop a Neary 180 spin grinder with the bed knife grinding attachment - and occasionally a customer will want one of their crappy tru-cuts ground but the only time the Toro 216-G is fired up is to move it out of the way.
Now I use the Navigator exclusively.
Nice Try = You Suck Spelled Differently
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012,™ - Moose River Media
All times are GMT -4. The time now is 02:08 PM.

Page generated in 0.08187 seconds with 8 queries