Register free!

The Green Industry's Resource Center


Reply
 
Thread Tools   Display Modes
  #1  
Old 09-04-2009, 08:43 AM
bligh61 bligh61 is offline
LawnSite Member
 
Join Date: Nov 2003
Location: long island ny
Posts: 235
Walker Mower Mystery

I purchased a new 2009 26hp efi ghs 42" deck Walker mower last month, and it hasn't been cutting properly. I have had it to the shop twice and other than the dull blades, on it at the time, could find nothing wrong. After a pass cutting there are sporadic high spots of un cut grass. This happens on level ground as well as some uneven ground. Shop says rpms are ok, blower housing is clear, screen is clear, pto belts are tight, every thing is freshly lubed. I have used 3/4 sets of blades with the same outcome. I am baffled, the only new design on the machine is a larger one-piece catcher and larger blower housing. Expensive machine and now i am using my old one with better results. Any ideas would be great. Thanks
Reply With Quote
  #2  
Old 09-04-2009, 09:34 AM
ericg's Avatar
ericg ericg is offline
LawnSite Senior Member
 
Join Date: Aug 2006
Location: New York
Posts: 521
Walker Mower Mystery

I realize that it is a new machine but could the shear pins on either the blades or the pto shaft be suspect?
Reply With Quote
  #3  
Old 09-04-2009, 01:29 PM
bligh61 bligh61 is offline
LawnSite Member
 
Join Date: Nov 2003
Location: long island ny
Posts: 235
The pto shear was fine and so are the blade shear bolts
Reply With Quote
  #4  
Old 09-04-2009, 03:25 PM
MarcSmith MarcSmith is offline
LawnSite Fanatic
 
Join Date: Jul 2004
Location: Washington DC
Posts: 7,242
have you had the shop to come out to one of your jobs and see the cut quality issue?

dumb question I know, but are the blade on the proper sides? I know my walker would cut horrible with the right blade on the left side...
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:38 AM.

Page generated in 0.06576 seconds with 7 queries