Register free!


Reply
 
Thread Tools   Display Modes
  #1  
Old 10-19-2009, 04:37 PM
mtaylor1 mtaylor1 is offline
LawnSite Member
 
Join Date: Mar 2007
Location: Tampa, FL
Posts: 14
Repair Help Lesco HPS Ride-On Spreader

I have a Lesco HPS Ride-On Spreader that loses propulsion after a few minutes of operation on wet turf. The problem is not in the motor. I suspect the belt drive needs to be tightened, but I have no idea how to do that. The unit has less than 50 hours of operation on it. Any ideas?

Is there a repair manual available for this unit? Any other sources for repair on this unit?
Reply With Quote
  #2  
Old 10-19-2009, 05:22 PM
LushGreenLawn's Avatar
LushGreenLawn LushGreenLawn is offline
LawnSite Silver Member
 
Join Date: Mar 2006
Location: Dover, DE
Posts: 2,123
You may just need a new belt, they do stretch over time.
Posted via Mobile Device
Reply With Quote
  #3  
Old 10-19-2009, 09:43 PM
jbturf jbturf is online now
LawnSite Bronze Member
 
Join Date: Sep 2007
Location: groton, MA
Posts: 1,317
do a search on here,
myself and others have had similar troubles

they are notorious for premature tensioner pulley failure,
and the tensioner not being set tight enough from the factory
Reply With Quote
  #4  
Old 10-21-2009, 10:57 AM
cturf cturf is offline
LawnSite Member
 
Join Date: Oct 2009
Location: Tuttle Ok
Posts: 20
These machines corrode fast you must keep it clean and lubed. The idler arm (the piece that hold the pulley that keeps tension on the belt) make sure it moves freely. It will apear to be of until you try to move it by hand it should move back and forth.
Reply With Quote
Reply

Tags
fertilizer spreader , hps , lesco , spreader

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 12:10 PM.

Page generated in 0.06472 seconds with 7 queries