Thread Tools   Display Modes
Old 06-02-2000, 04:38 PM
steveair steveair is offline
LawnSite Bronze Member
Join Date: Feb 2000
Location: morristown, nj
Posts: 1,073
Hey paul,<p>I guess your caps don't already have a bevel on the edge, or is the bevel not good enough. I use a product from Grinnel, here in NJ, and they have a good bevel already.<p>One thing though, the caps are double faced (rough/beveled on both faces) and are a problem sometime when starting pavers at the back face of them. left with a 1/4 to almost a 1/2 gap sometimes between paver and cap. Sometimes I just chisel off any of the big chunks, but maybe the grinder would be good for this. thanks<p>steveair
Reply With Quote
Old 06-02-2000, 05:21 PM
paul paul is offline
Lawnsite Addict
Join Date: Dec 1999
Location: Chicago,Ill.
Posts: 1,625
Steveair, Some block that we get only has a bevel on one side (face) others have a bevel on both sides but don't have a bevel on the outside edges.<br>As far as cutting brick with a hand saw we do it it goes much faster and the edge is much better because it is more even (saw cuts two bricks at one time) so edges are straighter.<p><p>----------<br>paul<br>
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 04:45 PM.

Page generated in 0.06764 seconds with 8 queries