Need a couple parts

[User Name Taken]

Hi guys, new to the site. Looking for some blades and a hydo filter for my Hustler 23/52" Mini Z. I see there are a few different blades out there. I have heard the Gator blades take more HP to run
I have been having some clogging problems due mostly to clover and am wondering if I need a "high lift" blade or what.

[mowpart rep]

Do you have the model number for your mower or the part number for the blades and filters?

[mowpart rep]

The gators and high lift do require a little more power. I wouldn't worry too much 23hp on a 52" is pretty powerful. High lift or gator blades will help solve your discharge issue. You could also try spraying fluid film on the bottom side of your deck.

http://www.mowpart.com/Fluid-Film/c1200/index.html

[User Name Taken]

Thank you Russel. Model # is 927244 s/n 07053103. filter # is 768341 thanks

[mowpart rep]

Either of these blades will work for your mower.

http://www.mowpart.com/advanced_sear...=15&search.y=6

Here is a link to your filter.

http://www.mowpart.com/advanced_sear...k2utpp1leej757

Thanks.
Russell

[User Name Taken]

I went to order and is says no longer available on the filter ??

[User Name Taken]

OK guys, Back again....... What are these new Excel G6 blades on the site? Is 17 55/64 close to 17 7/8 ? They look like a gator blade. I just need replacements for the fusion blades. My gator blades are holding up well but don't discharge the clover well at all. I sprayed the underside of the deck with non stick spray after this go round. We'll see next time if it helps.

[mowpart rep]

This is the newest and best blade we offer. They are the replacement for fusion. Please call our toll free number 877-306-3708 If you have your old fusion part number they can tell you the G6 replacement blade.

[User Name Taken]

Thank you again Russell.

[User Name Taken]

795526 - for reference.