The Green Industry's Resource Center

Myellowz · #1 12-07-2009, 02:15 PM

Check out the New and Improved Web sit for " The Director OCDC ". WWW.thedirectorocdc.com Some of you were asking for a video so we added 4 for your viewing pleasure.

greenred · #2 12-07-2009, 03:21 PM

That is a pretty nice set up. Any chance you will be producing one for Scag Velocity Decks?

Myellowz · #3 12-07-2009, 05:22 PM

We are planning on designing one for the scag line as well as some other popular brands out there. I have to finish my season first. Can't seem to finish all the leaf jobs. It snowed here last week.

greenred · #4 12-07-2009, 06:10 PM

Quote:

Originally Posted by Myellowz

We are planning on designing one for the scag line as well as some other popular brands out there. I have to finish my season first. Can't seem to finish all the leaf jobs. It snowed here last week.

Cool. cant wait till it comes out.

grassman177 · #5 12-07-2009, 10:10 PM

looks nice, how much do they run? oh, and nic emower too

Myellowz · #6 12-07-2009, 10:50 PM

We are selling them for $239 and Free Shipping.

michaelee2 · #7 12-08-2009, 06:31 PM

Have any for the exmark 46" triton deck.

Myellowz · #8 12-08-2009, 09:18 PM

No Sorry we don't because there is no room to mount the upright onto the mower deck.

demhustler · #9 12-09-2009, 12:04 AM

Quote:

Originally Posted by Myellowz

No Sorry we don't because there is no room to mount the upright onto the mower deck.

may be set adjustment lever on deck lift handle (w/o mount column on the deck)?
deck mount column - weakest point on all other ocdc we had - in short while it getting loose, shakes and eventually get broken; but what left - chute plate itself - works good, holds just on rubber bungee and rope (and nothing gets broken) : ))))
M., thought about triangulate mount column more? (three legs or wider bolts pattern)
thank you

Myellowz · #10 12-09-2009, 07:57 AM

My first OCDC I used was a plate with a cable attached to it. The problem was that the air vilocity coming from the deck was so great, it would blow the plate open enough it defeated it's purpose. This is why I designed the unit you now see. As for the mounting being inferior, the mounting of our upright takes up approx. 3" of deck space as well as a support plate under the deck for extra support. We also use "Locking" nuts so they won't come loose. Hope this helps.