|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
05-26-2002, 02:27 PM
|
|||
|
|||
|
when should i change the break-in oil
I just bought a pm 260z. when should i change the break-in oil?
|
|
#2
05-26-2002, 04:23 PM
|
||||
|
||||
|
i was told 50 hours
|
|
#3
05-26-2002, 05:49 PM
|
|||
|
|||
|
I do't know what gravely suggest, or what engine you are using, but we make the initial oil change on all new machines after five(5) hours of use.
it is sometimes possible to have some metal shavings in there, and you don't need those in any longer than necessary. after your intitial oil change, then you can go 50 hours if you wish. |
|
#4
05-28-2002, 08:30 AM
|
|||
|
|||
|
Initial Engine Oil Change
The manual indicates you should change at 50 hrs. for the first time then every 100 hrs. there after. That is what is recommended from the engine manufacture. You can change oil sooner if you like.
Regards, Dan Kilgas
__________________
Mission: Constant Never-ending Improvement |
|
#5
05-28-2002, 10:04 PM
|
|||
|
|||
|
Well its a 25hp Kolher. I have 22 hours on it
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
All times are GMT -4. The time now is 05:10 PM.
Forum Rules:
This Ariens/Gravely sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.
All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.
LawnSite.com is not affiliated with the Ariens/Gravely company. This forum is provided by LawnSite.com to Ariens/Gravely in order to better server their customers
Linear Mode
