Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 02-15-2010, 08:34 PM
patpls patpls is offline
LawnSite Member
 
Join Date: Aug 2006
Location: Mn
Posts: 75
dual axle brake wiring?

Hi Guys, rewiring a dual axle dump trailer and wanted to know if there is a best way to wire the electric brakes. Is the daisy chain method good or bad? Should I branch from the hot wire before the first magnet or not. I did do a search and still wasn't sure.
Thanks.
Reply With Quote
  #2  
Old 02-16-2010, 10:43 PM
ranger350 ranger350 is offline
LawnSite Member
 
Join Date: May 2007
Location: Burford, Ontario
Posts: 103
doesnt really matter, just as long as the feed wire is sufficent
Reply With Quote
  #3  
Old 02-16-2010, 11:20 PM
Jason Rose's Avatar
Jason Rose Jason Rose is offline
LawnSite Fanatic
 
Join Date: Jan 2003
Location: Hutchinson, Kansas
Posts: 5,775
Right, use 12ga. wire from the plug back. And shrink tube your connections.

I was having problems with mine and made all 4 brakes into a loop with the wire so I could be 100% sure that all 4 were getting adequete power, and the same amount of power, at all times. However it didn't help much as it was more of a problem with the magnets in the drums not making good contact because of how they wear. I replaced the brakes and didn't replace the hubs. Takes a while for the magnets to seat good into the scoring inside the drums from the old magnets. If there's too much, or too deep of grooves on the magnet mating surface in the drums you have to replace the drums. Yeah it's a bum deal... Brake shop told me they can't mill the surface smooth where the magnets ride. I hate electric brakes...
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:38 PM.

Page generated in 0.08074 seconds with 9 queries