Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather


Reply
 
Thread Tools Display Modes
  #1  
Old 03-07-2010, 04:18 PM
doubleedge's Avatar
doubleedge doubleedge is offline
LawnSite Senior Member
 
Join Date: Mar 2008
Location: ND
Posts: 912
A few questions about the Grandstand.

Quote:
Originally Posted by The Toro Company View Post
At present, a deck-mounted (side-car style) bagger is available for the GrandStand. (Toro model 30104.) A higher capacity bagger is also under development. Precise timing for the higher capacity collection system has not yet been announced.

Thanks -

The Toro Company
Do you have any updates about the higher capacity bagger yet? Will there be higher capacity baggers for the smaller Grandstand models, too?

Is it possible to order a small Grandstand from the factory with anti scalp wheels? Is there a reason why the smaller Grandstands don't already have them?

On the 36" Grandstand model, are the blades overlapping and timed, or is one in front of the other like on 2 bladed lawn tractors?
__________________


Cummins isn't spelled with a g!!!!!
Reply With Quote
  #2  
Old 03-10-2010, 02:49 PM
The Toro Company The Toro Company is offline
Sponsor
 
Join Date: Feb 2009
Posts: 357
Doubleedge -

Higher-capacity baggers will not be available through Toro for the 2010 model year. No additional information regarding future seasons is available at this time.

No, factory-installed anti-scalp rollers are not available on the small-frame GrandStand models. The primary reasons are ... (1) Our aim is to keep the machines as compact as possible. As a result, there is not sufficient clearance between the cutting decks and the caster tires to allow for anti-scalp rollers. (2) We have not demonstrated a need for anti-scalp rollers on these machines. The wheel base is relatively short, and the cutting decks do not extend significantly beyond the tires, so scalping is not a major concern on these machines.

The 36" GrandStand utilizes a two-blade cutting deck where the blades are "staggered" (overlapping, but not timed), just like mid-size walk-behind models.

-The Toro Company
Reply With Quote
  #3  
Old 03-12-2010, 02:36 PM
brucec32's Avatar
brucec32 brucec32 is offline
LawnSite Platinum Member
 
Join Date: Jul 2001
Location: Atlanta, GA
Posts: 4,405
I wouldn't expect a toro employee to be allowed to point this out, but want the real reason there are no antiscalps? It isn't the wheels fitting, or that they aren't needed. It's that the deck is now too heavy with the engine mounted to the deck. The antiscalps would cause the deck to gouge the turf instead of rolling up over it.

Personally I think the 36" will be fine without them. The 40", due to the decision to narrow the front casters in the interest of "trim edge", will likely scalp leave noticeable uneven spots when mowing at lower heights on undulating terrain. It's simple geometry. How could it not?
Reply With Quote
  #4  
Old 03-12-2010, 03:01 PM
djagusch djagusch is online now
LawnSite Gold Member
 
Join Date: Mar 2006
Location: MN
Posts: 3,430
I would say most 36" and 40" decks on the market don't have anti scalp wheels. The castor wheels are close to the edge of the deck so they will raise the deck out of the way. IMO if you are having scalping issues with a 36/40 don't try mowing with a 72 deck.
Reply With Quote
  #5  
Old 03-13-2010, 09:30 AM
lilweeds lilweeds is offline
LawnSite Senior Member
 
Join Date: Feb 2006
Location: Blandon, Pa
Posts: 596
Exactly they aren't needed. That being said I'm sure you could fab some up if you want to.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:44 AM.

Page generated in 0.10093 seconds with 9 queries