Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 04-02-2010, 01:18 AM
bklw bklw is offline
LawnSite Member
 
Join Date: Mar 2010
Location: SW OK
Posts: 1
No spark form plugs

I have an Onan NHC-MS/3348C in a Ford CL-30. It ran fine till I parked it for two years. I cleaned the carb installed new plugs and such and it ran for about 4 hours. It started missing and had very little power. I replaced the plugs due to a lot of carbon on the plugs and a weak spark. It didn't help so I parked it. That was now three years ago. I recently installed a new battery, new coil, new plugs, drained the fuel and cleaned the carb. Now I have no spark at all. There are 3 wires to the coil. Red for pos, black for neg and a third wire I've forgotten which terminal it goes to on the coil. It seems to come from the relay for the starter solenoid. I tried both terminals on the coil and still no spark. I'd like to replace the ignition 'module' but can't find any parts information for it. Any suggestions on what else I could look at to get the plugs to fire or where I could find the information to replace the 'ignition module'?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:41 AM.

Page generated in 0.06251 seconds with 9 queries