Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 04-21-2010, 12:00 PM
tomwom tomwom is offline
LawnSite Member
 
Join Date: Aug 2009
Location: Shenandoah Valley of Virginia
Posts: 20
Help with a Stihl MS250

I just used this saw a couple of weeks ago with no problem. Now it will not start. It has a spark, and fuel is getting to the chamber. Any ideas?

Thanks!
Reply With Quote
  #2  
Old 04-21-2010, 02:47 PM
rotti1968 rotti1968 is offline
LawnSite Member
 
Join Date: Nov 2009
Location: branchville nj
Posts: 169
hows you compression ? water in the fuel ? flooded? if flooded remove spark plug and let dry,make sure switch is turned off and pull recoil to remove and excess fuel from cylinder,install the plug,set the switch to choke, then move up one click so the trigger is still locked and pull the recoil until it starts making sure to not turn the choke back on if its the flooded condition it make 10 or 15 pulls but it will fire.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:33 PM.

Page generated in 0.05997 seconds with 7 queries