Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 04-26-2010, 10:33 PM
jelgan jelgan is offline
LawnSite Member
 
Join Date: Apr 2010
Location: Ramsey, In
Posts: 74
Everide warrior

It appears from pictures that the warrior has a bar going to the front pivoting axle so that when a wheel drops in a low spot the deck will move up or down. Am I correct and if so, does it scalp when a tire drops in a low spot or hole? It looks like it would. Also how do you like the mower in general?
Reply With Quote
  #2  
Old 04-26-2010, 11:42 PM
topsites topsites is offline
LawnSite Fanatic
 
Join Date: Mar 2005
Location: Richmond Virginia
Posts: 21,677
If the operator doesn't like the way the front end pivots independent of the
back of the machine, all they do is pull a pin (might be two) and the entire
assembly becomes like a fixed deck (except it still hangs on chains).

Like any floating deck, the amount of motion the mower can undertake due to
terrain inconsistencies is limited by mechanical circumstance, it only moves an
inch or two until it hits the stop.

Yes, if an operator angles the mower across a bend wrong it will scalp,
all mowers do that, the wider the deck, the fatter the chance.

The deck itself hangs from the frame, it does not move completely independently with
either the front or the rear... It is attached at four points with chains, hence it strikes
a sort of balance between... Keeping in mind that no matter how great the design the
deck is one solid piece of steel so this balance may or may not provide the most optimal cut,
in most cases it simply depends.

Last edited by topsites; 04-26-2010 at 11:47 PM.
Reply With Quote
  #3  
Old 04-27-2010, 09:53 PM
jelgan jelgan is offline
LawnSite Member
 
Join Date: Apr 2010
Location: Ramsey, In
Posts: 74
Thanks Topsites--I thought a picture I saw showed a flat piece that the run from the front of the deck to the rear of the right side of the front axle. I have a dealer not far away--guess i will have to go and take a look see.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:00 PM.

Page generated in 0.06524 seconds with 7 queries