Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 05-06-2010, 12:30 PM
chideloh chideloh is offline
LawnSite Member
 
Join Date: Sep 2009
Location: Adelphi, MD
Posts: 22
Can you replace 700-026 with 700-023?

I am trying to replace my tansmission on my scag 61". The transmission is Peerless 700-026. I called a place and they said, it could be replaced with a 700-023 transmission.

Does anybody have info on this?

Thank you

David
Reply With Quote
  #2  
Old 05-06-2010, 06:52 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,778
David,

The shift fork and output shafts are the same between the two meaning your shifter and drive axles/sprocket will work on the 023. The input shaft (belt pulley shaft) has a different part number. Some are keyed some are splined, Some have a screw in the end to hold the pulley on and some use a retaining ring (snap ring).

I would suggest checking your old input shaft then call this place back and ask about the shaft on the 023 to make sure your pulley will fit, It really shouldn't matter if one is a snap-ring and the other is a screw. Just make sure both shafts are the same length and splined or keyed.....
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Quote:
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #3  
Old 05-06-2010, 11:15 PM
chideloh chideloh is offline
LawnSite Member
 
Join Date: Sep 2009
Location: Adelphi, MD
Posts: 22
Thanks for the info, Restrorob. Appreciate it.

David
Reply With Quote
  #4  
Old 05-06-2010, 11:41 PM
topsites topsites is offline
LawnSite Fanatic
 
Join Date: Mar 2005
Location: Richmond Virginia
Posts: 21,677
If all else fails a new pulley would probably work, thou that's extra $ but if all else fails.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 10:36 AM.

Page generated in 0.06410 seconds with 7 queries