Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 05-27-2010, 10:46 PM
bblue bblue is offline
LawnSite Member
 
Join Date: Apr 2010
Posts: 1
leaking crankshaft oil seal

I recently acquired a 2000 exmark lazer z with a 23hp kolher engine and it has about 3100 hrs on it. It had a small oil leak coming from the crank seal on the pto side but it has began to get worse. Im mechnically inclined just wondering how hard this is to change this before I dig in. Also I know this machine has high hours but it runs and cuts great but the hydro whine loud when it is in motion or under hard load like up steep hills is this normal or should I be worried? All comments are appreciated thanks in advance
Reply With Quote
  #2  
Old 05-28-2010, 02:46 AM
topsites topsites is offline
LawnSite Fanatic
 
Join Date: Mar 2005
Location: Richmond Virginia
Posts: 21,677
If I'm not mistaken you'll have to at the very least take
that cover off, so you'll probably have to pull the engine and
you're looking at internal engine work, whether it involves setting
it back to TDC or what have you, that I couldn't say.
Reply With Quote
  #3  
Old 05-28-2010, 09:04 AM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,020
Lazer Z uses side shaft motors... Pull the bumper , remove the clutch, replace the seal.
Be sure not to scratch the crankshaft.

Hydro's on Lazers whine...replace the hydro filter regularly...replace the dampners and it will drive like a new one.
Reply With Quote
  #4  
Old 05-29-2010, 06:14 AM
Merkava_4's Avatar
Merkava_4 Merkava_4 is offline
LawnSite Bronze Member
 
Join Date: Sep 2009
Location: Clovis CA
Posts: 1,202
Is it the Model CV23 ?

Why not download the service manual? Kohler lets you download
their service manuals for free; they're not communists like Stihl is.
From what I can see, the oil pan doubles as a PTO side cover.
Doesn't look too hard to me. :shrugs:
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:26 PM.

Page generated in 0.06912 seconds with 7 queries