The Green Industry's Resource Center

Old 06-07-2010, 08:14 PM
wright5223 wright5223 is offline
LawnSite Senior Member
Join Date: Jun 2008
Location: Overland Park KS
Posts: 290
Yellow wire fulse keeps blowing

Everytime I turn the key the fulse for the yellow wire will blow i've replaced the volt regulator but that didn't work any thoughts what is happening? Thanks!
2008 Chevy 2500HD Silverado
6 1/2x12 trailer
52' Wright Stander
36' Wright Stander
32' Wright Stander
Redmax Blowers
Shindawia Trimmers
Reply With Quote
Old 06-08-2010, 10:36 AM
WrightCommercial WrightCommercial is offline
Join Date: Apr 2008
Location: Frederick, MD
Posts: 522

Unhook the yellow wire at the engine and try and start the mower. If the yellow fuse blows the issue is on the mower side, if it doesn't then there is still an issue on the engine side (possibly a short in the stator). If it blows check the harness for any exposed section of the yellow wire where it could be touching metal.

Best Regards
Wright Mfg. Service Dept.
Reply With Quote
Old 03-21-2012, 01:49 PM
Weekendwrench Weekendwrench is offline
LawnSite Member
Join Date: Jan 2010
Location: NY
Posts: 35
Question I have a 52 rh with a 19 kaw and the purple wire fuse blows as soon as I turn the key on. This wiring is beating me and I am not thrilled about it. Any help would be appreciated thanks
Posted via Mobile Device
Reply With Quote
Old 03-21-2012, 02:48 PM
WrightCommercial WrightCommercial is offline
Join Date: Apr 2008
Location: Frederick, MD
Posts: 522

The purple wire is from the solenoid to the key switch and provides power to the orange wire at the keyswitch to power the harness. If you unhook the orange wire from the key switch and it still blows more than likely the key switch has the short. If it doesn't blow then one of the other components has a short. The orange wire is doubled at the component connections so you can unplug one at a time and still send power thru the harness to the other components, when it stops blowing that is the problem component. Also check the harness for any pinch points or areas where it might have been cut exposing the wire.

Best Regards
Wright Mfg.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:13 AM.

Page generated in 0.06626 seconds with 8 queries