Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 08-22-2002, 10:54 PM
stslawncare stslawncare is offline
LawnSite Bronze Member
 
Join Date: Jun 2000
Location: DE
Posts: 1,474
putting together mowers

hey guys, i got the two rear enging snapper riding mowers and will be hopefully getting them running. along with them i received one self propelled snapper push mower and two frames and 4 engines. my question is, how hard and what all is involved in putting together the frames and engines and getting them to cut?
__________________
Scottie
STS Lawn Care
Nutra Soils Inc. ( www.nutrasoils.com )
Reply With Quote
  #2  
Old 08-23-2002, 08:19 AM
khouse khouse is offline
LawnSite Bronze Member
 
Join Date: Feb 2001
Location: lee's summit, mo
Posts: 1,479
may be easy or hard depending on your experience. get one running and let us know if it was hard for you. good luck.
Reply With Quote
  #3  
Old 08-23-2002, 05:03 PM
Bob Minney's Avatar
Bob Minney Bob Minney is offline
LawnSite Bronze Member
 
Join Date: Jan 2002
Location: The Hottest driest city next to Hades - Denver Colorado
Posts: 1,094
If you have manuals its going to be a lot easier-the 21s are the easiest. Plus the more you do the simpler it will seem.
If you hit a snag ask a specific question, much easier to help you at that point.
__________________
If you want people to notice your faults, start giving advice.
Reply With Quote
  #4  
Old 08-23-2002, 06:52 PM
vipermanz's Avatar
vipermanz vipermanz is offline
LawnSite Bronze Member
 
Join Date: Mar 2001
Location: Birmingham Alabama
Posts: 1,780
the only problem you might have is the bolt configs
__________________
<img src="http://img.photobucket.com/albums/v404/vipermanz/Newbanner.jpg" alt="Image hosted by Photobucket.com">
Check Out Weldingweb !!!
Reply With Quote
  #5  
Old 08-23-2002, 09:14 PM
dlandscaping dlandscaping is offline
LawnSite Senior Member
 
Join Date: Aug 2001
Location: mass
Posts: 836
You may have more problems than just bolt lineups. Pullies and shaft size may also prohibit you from transplanting engines on them riders. It could take you an hour or less or much longer. One 21" transplant once took me 5hours and three bodys since i had a non bbc model and sp with different shaft sizes etc.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 04:26 AM.

Page generated in 0.07894 seconds with 9 queries