Go Back   LawnSite.comô - Lawn Care & Landscaping Business Forum, Discuss News & Reviews > Sponsor Forums - Discuss with Sponsors Directly > Lawn Mowing Equipment & Accessories * * * * SPONSOR FORUMS > Magna-Matic
User Name
Password
Register FAQ Calendar Mark Forums Read


Magna-Matic Lawn Mower Blade Balancers, Sharpeners, and more

Reply
 
Thread Tools Display Modes
  #1  
Old 08-12-2002, 07:35 PM
Westbrooklawn Westbrooklawn is offline
LawnSite Senior Member
 
Join Date: Apr 2002
Location: Durham, NC
Posts: 403
Walker Blades

Does your blade balancer work with the Walker GHS blades. I am concerned about the mounting hub/shear bolts that remain on the Walker blades when you remove them from the spindle.
Reply With Quote
  #2  
Old 08-12-2002, 08:51 PM
Magna-Matic's Avatar
Magna-Matic Magna-Matic is offline
Sponsor
 
Join Date: Jul 2001
Location: Waldo, Wisconsin
Posts: 798
To my knowledge there should be no problem with any blade on the market to be used with the MAG-1000.

The outside diameter of the outer ring of the magnet is 2-1/2 inches.

If you have any concern of the use of the MAG-1000 you may order one, and if it is not able to be used you may send it back for a full refund (less the shipping costs) within 30 days. This can be done with any of our products.

The other route we can go is: You could send us one of your blades and we could test it, and then let you know that way.

We would be very interested to know if there is a blade out there that our balancer cannot be used with.

Thank you,
__________________
Gerd Ferdinand Bauer II

Magna-Matic Corporation
Waldo WI USA
800-328-1110 (toll free USA & Canda)
920-564-2366 (PHONE)
gbauer2@magna-matic.com
www.magna-matic.com
www.magna-matic-direct.com
www.youtube.com/magnamaticcorp
Reply With Quote
  #3  
Old 09-13-2002, 10:37 PM
SCAPEASAURUSREX's Avatar
SCAPEASAURUSREX SCAPEASAURUSREX is offline
LawnSite Senior Member
 
Join Date: Jul 2001
Location: North Jersey
Posts: 835
You probably have to take the blade cups off to balance them. The hole on the cups is not round, has two flat sides to index onto the spindles, so that would not allow the blade to sit on the balancer correctly ? Maybe if upside down ??
__________________
SCAPEASAURUSREX
NORTHERN NEW JERSEY
Reply With Quote
  #4  
Old 01-16-2003, 12:13 AM
hoagie's Avatar
hoagie hoagie is offline
LawnSite Member
 
Join Date: Feb 2002
Location: MA- South Shore
Posts: 222
The balancer works fine w/ walker blades... no need to take the cup off.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:30 AM.


Our Links:  PlowSite - WeldingWeb - LawnCareSuccess - Everythinggreen - Lawnbusiness.net
Recommended Sites:  ContractorTalk.com

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
Lawnsite,  Plowsite, WeldingWeb, LawnCareSuccess, Everythinggreen, & Lawnbusiness.net are trademarks of Lawn Care Success, Inc

Page generated in 0.06376 seconds with 7 queries